Well Known Machine Tool Dealer – Action Machinery Co.

Online Auction Ends: Tuesday, August 11th 2020 at 1:00 (EST)
Inspection: Monday August 10th, from 8:00 A.M. to 4:00 P.M. 

2320 Highland Avenue, Bethlehem, PA, 18020

 
 
  CNC LATHES, INCLUDES GANG TYPE
  HAAS MDL. SL-30T CNC LATHE WITH HAAS CONTROL, 10″ CHUCK, SWING DIAMETER:  OVER FRONT APRON: 30″, OVER CROSS SLIDE: 14.5″,  CAPACITIES: CHUCK SIZE: 10″, STANDARD BAR CAPACITY: 2.5″, MAXIMUM CUTTING DIAMETER: 14.5″, MAXIMUM CUTTING LENGTH: 34″, SPINDLE: MAXIMUM SPEED: 3,400 RPM, PEAK HORSEPOWER: 30 HP, SPINDLE NOSE: A2-6, SPINDLE BORE: 3″, DRAW TUBE BORE: 2.56″, TRAVELS & FEED RATES: X-AXIS: 11.30″, Z-AXIS: 34″, RAPIDS: 710 IPM, TURRET NUMBER OF TOOLS: 12, EQUIPPED WITH HAAS CONTROL, 10″ 3-JAW CHUCK, TAILSTOCK, TOOL SETTER, (20+) TOOL HOLDERS, HIGH INTENSITY LIGHTING, 1 MB EXTENDED MEMORY, HIGH PRESSURE COOLANT, SPINDLE ORIENT, AUTO JET BLAST, S/N 64869 (2002) [Stock # GP-21229]                    
  WASINO MODEL G-07 GANG TOOL CNC LATHE WITH GANTRY LOADER & FANUC 21iTB CONTROL, SPINDLE BORE: 1-3/4″, BAR CAPACITY: 1-1/2″, SPINDLE NOSE: 100mm FLAT, SPINDLE SPEED, MAXIMUM: 4,000 RPM, SPINDLE MOTOR, DUTY RATED: 7.5 HP, SPINDLE CENTER HEIGHT: 39-3/8″, X-AXIS TRAVEL: 18.9″, Z-AXIS TRAVEL: 11.2″, TOP PLATE: 22″ X 6.75″, EQUIPPED WITH FANUC 21iTB CONTROL, 10 STATION S.ROBO INTEGRATED GANTRY LOADER, NORTHFIELD 3-JAW CHUCK, MISCELLANEOUS GANG TOOL TOP PLATE TOOL HOLDERS, S/N: 3163 (2004) [STOCK # JV-20988TK]
  AKEBONO MODEL MINC-26 GANG TOOL CNC LATHE WITH FANUC OT CONTROL, SIZE OF T-SLOTTED SLIDE: 16″ X 7-1/2″, TRAVEL (X) APPROX.: 9″, TRAVEL (Z) APPROX.: 9″, SPINDLE CAPACITY: 1-1/16″, MAXIMUM SPINDLE SPEED: 6,000 RPM, EQUIPPED WITH FANUC OT CONTROL & DRIVES, 5C COLLET CHUCK, MISC SLIDE TOOLING, FLOOD COOLANT, FULL GUARDING, S/N: 3100205 [STOCK # DK-17998]
  HARDINGE MODEL CHNCI CNC LATHE WITH GE FANUC OT CONTROL, SPINDLE CONFIGURATION: ANSI A2-5″, HOLE THROUGH SPINDLE: 1.875″, 16C COLLET CAPACITY: 1-5/8″, SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM, AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP, CAPACITY MAXIMUM SWING OVER BED: 14.000″, MAXIMUM THREADING DIAMETER: 8.000″, MAXIMUM TURNING DIAMETER: 8.000″, MAXIMUM FIXTURE DIAMETER: 9.000″, MAXIMUM ALLOWABLE WEIGHT ON SPINDLE (INCLUDING WORKHOLDING DEVICE): 75 LBS., 8 TURRET STATIONS, EQUIPPED WITH GE FANUC OT CONTROL, S/N: CN-4510T (1990) [STOCK # DK-18139]
  HWACHEON Hi-TECH 100B 2-AXIS CNC LATHE, 8” CHUCK, SWING OVER BED: 19.7”, MAXIMUM TURNING DIAMETER: 11.8”, STANDARD TURNING DIAMETER: 8.3”, MAXIMUM TURNING LENGTH: 15.7”, SPINDLE NOSE: A2-6, MAXIMUM SPINDLE SPEED: 6,000 RPM, HOLE THROUGH SPINDLE: 3”, BAR SIZE: 1.75”, MOTOR: 15 HP, NUMBER OF TURRET TOOLS: 12, FEED: RAPIDS (X/Z): 1,180 IPM, BALLSCREW LEAD (X/Z): .5”/.5”, TRAVERSE (X/Z): 6.7”/16.9”, SERVO MOTOR (X/Z): 2.1 HP/2.5 HP, TAILSTOCK QUILL DIAMETER: 3.2”, QUILL STROKE: 3.9”, QUILL TAPER: #3 MT, EQUIPPED WITH MITSUBISHI HYD-3000T CONTROL, 8” 3-JAW CHUCK, TAILSTOCK, MISCELLANEOUS TOOL BLOCKS, S/N: M012348D2FJ (2000) [STOCK # HB-19918]
  HAAS SERVO BAR 300 MAGAZINE TYPE BARFEEDER, BAR CAPACITY: 1/4″ TO 3-1/8″ X 60″ LONG, TRAY CAPACITY: 1″ DIAMETER BARS X 30 PIECES, S/N: 90592 (2001) [STOCK # TK-20458]
  VERTICAL MACHINING CONTROLS
  DAEWOO MYNX 500 CNC 4-AXIS VERTICAL MACHINING CENTER WITH FANUC 21M CONTROL, TABLE SIZE: 39″ X 17″, SPINDLE NOSE TO TABLE TOP: 4″ – 29″, X-AXIS TRAVEL: 40″, Y-AXIS TRAVEL: 20″, Z-AXIS TRAVEL: 22″, SPINDLE SPEEDS: 0-8,000 RPM, SPINDLE TAPER: CAT 40, SPINDLE MOTOR: 20 HP, 20-POSITION TOOL CHANGER CAPACITY: 20 ATC, EQUIPPED WITH FANUC 21M CNC CONTROL, SMW ACUROCK RT-160 4TH AXIS ROTARY TABLE WITH 8” 3-JAW CHUCK AND ACUSMART 55 CONTROL, CHIP CONVEYOR, S/N: AV5E-0745 (2001) [STOCK # JV-19872TK]
  DAEWOO MODEL DMV-500 VERTICAL MACHINING CENTER WITH MITSUBISHI MELDAS 64 CONTROL, TABLE SIZE: 47.2″ X 19.7″, X-AXIS TRAVEL: 40.2″, Y-AXIS TRAVEL: 19.7″, Z-AXIS TRAVEL: 20.1”, SPINDLE TAPER: 40, SPINDLE DRIVE MOTOR (30 MIN/CONT.): 20/15 HP, MAXIMUM SPINDLE SPEED: 8,000 RPM, 20-POSITION TOOL STORAGE CAPACITY: 30, EQUIPPED WITH MITSUBISHI MELDAS 64 CONTROL, BOX WAYS, CHIP AUGER, S/N: AV560572, (1999) [STOCK # JV-20047TK]
  DAEWOO MODEL ACE 50 VERTICAL MACHINING CENTER WITH MITSUBISHI MELDAS 64 CONTROL, TABLE SIZE: 47.2″ X 19.7″, MAXIMUM TABLE LOAD: 1,760 LBS, SPINDLE NOSE TO TABLE TOP: 5.9” – 26” (EVENLY DISTRIBUTED), X-AXIS TRAVEL: 40”, Y-AXIS TRAVEL: 20”, Z-AXIS TRAVEL: 20”, RAPID TRAVERSE RATE (X/Y/Z): 787/787/590 IPM, CUTTING FEED RATE (ALL AXES): 0.1 – 315 IPM, SPINDLE SPEEDS: 80 – 8,000 RPM, SPINDLE TAPER: 40, SPINDLE DRIVE MOTOR: 20 HP, 30-POSITION TOOL CHANGER CAPACITY: 30, EQUIPPED WITH MITSUBISHI MELDAS 64 CONTROL, BOX WAYS, TWIN TURBO CONVEYORS, S/N: AV45033D, (1997) [STOCK # JV-20046TK]
  MAKINO MODEL S33-APC VERTICAL MACHINING CENTER WITH AUTOMATIC PALLET CHANGER & PROFESSIONAL 3 CNC CONTROL, TABLE SIZE: 23.6” X 15.7”, MACHINING CUBE: 23.6” X 15.7” X 16.5”, TABLE LOAD: 880 LBS, X-AXIS TRAVEL: 25.6″, Y-AXIS TRAVEL: 19.7″, Z-AXIS TRAVEL: 17.7″, SPINDLE TAPER: CT-40, SPINDLE: 13,000 RPM, DRIVE MOTOR: 30/25 HP, AUTOMATIC TOOL CHANGER: 30, MAXIMUM TOOL DIAMETER: 4.72”, MAXIMUM TOOL WEIGHT: 17.6 LBS, EQUIPPED WITH PROFESSIONAL 3 CNC CONTROL, 217 PSI COOLANT THRU SPINDLE, CHIP CONVEYOR, (2) PALLET APC, S/N: V7065 (2003) [STOCK # JV-20700TK]
  HAAS MODEL VF-0E VERTICAL MACHINING CENTER WITH HAAS CONTROL, TRAVELS: X AXIS: 30”, Y AXIS: 16”, Z AXIS: 20”, SPINDLE NOSE TO TABLE: 4 –24”, TABLE LENGTH: 26”, WIDTH: 14”, MAXIMUM WEIGHT ON TABLE: 3,000 LBS, SPINDLE TAPER SIZE: # 40 TAPER, SPEED: 0-10,000 RPM, TRANSMISSION: VECTOR DUAL DRIVE, BELT DRIVE, MAXIMUM TORQUE: 75 FT-LB @ 1,400 RPM, SPINDLE MOTOR MAX RATING: 15 HP, AXIS MOTORS MAX RATING: 5 HP, FEEDRATES: RAPIDS: 710 IPM, MAXIMUM CUTTING: 500 IPM, 20-POSITION TOOL CHANGER, EQUIPPED WITH HAAS CONTROL, 1 MB EXTENDED MEMORY, PROGRAMMABLE COOLANT, QUICK CODE PROGRAMMING, RIGID TAP, FLOPPY DRIVE, S/N: 23313 (2000) [STOCK # GP-21121]
  HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, WITH FANUC 18M CONTROL, TRAVELS: X-AXIS LONGITUDINAL: 40.16″, Y-AXIS CROSS: 20.08″, Z-AXIS VERTICAL: 20.08″, SPINDLE NOSE TO TABLE SURFACE: 6.1″ TO 26.1″, SPINDLE CENTER TO COLUMN: 23″, TABLE LENGTH: 44″, WIDTH: 20″, SPINDLE TAPER SIZE: 40, SPINDLE MOTOR RATING (VECTOR DRIVE): 17.3 HP/13-KW, STANDARD SPINDLE SPEED: 8,000 RPM, TRANSMISSION: DIRECT BELT DRIVE, SLIDES WAY CONSTRUCTION: LINEAR GUIDES, AUTOMATIC TOOL CHANGER, ATC TYPE: CAROUSEL, SELECTION METHOD: BIDIRECTIONAL AND SHORTEST PATH, SHANK TYPE (SIZE 40): CAT-V,  COOLANT CAPABILITIES: COOLANT: WATER-BASE, TANK CAPACITY: 39.8 US GAL, FLOW RATE: 13.1 GPM, CHIP FLUSH FLOW RATE: 30 GPM, EQUIPPED WITH 20-POSITION AUTOMATIC TOOL CHANGER, FANUC 18M CNC CONTROL, CHIP CONVEYOR, RIGID TAPPING, PRE-WIRED 4TH AXIS, MANUAL PULSE GENERATOR, SURROUND TOOL COOLANT (5 COOLANT PORTS), S/N: NVC-367 (2000) [STOCK # GP-21045]
  HARDINGE MODEL VMC800II VERTICAL MACHINING CENTER WITH SIEMENS 810D CONTROL, TRAVELS: X-AXIS: 31.50”, Y-AXIS: 20.08”, Z-AXIS: 20.08”, Y-AXIS THROAT DISTANCE: 23”, TABLE WIDTH: 20.00”, LENGTH: 36.40”, LOAD CAPACITY: 1,540 LBS, SPINDLE TAPER: CAT 40,  SPEED RANGE: 10,000 RPM, TRANSMISSION: BELTED, MOTOR (CONT/PEAK): 10 /15 HP, CAROUSEL TYPE 20-POSITION AUTOMATIC TOOL CHANGER, EQUIPPED WITH SIEMENS 810D CONTROL MPG, HOOK UP FOR AIR HOSE, RIGID TAP, WORK LIGHT, SURROUND TOOL COOLANT, 4TH AXIS READY, COOLANT, S/N: NVB-535 (2001) [STOCK # TK-19514]
  EMMEGI INDEX PENDULAR 3-AXIS MACHINING CENTER WITH ISAC CNC CONTROL, X-AXIS TRAVEL: 255″ (LONG STEPS, 2 AREAS WITH 108.9” STEPS), Y-AXIS TRAVEL: 18.8″, Z-AXIS TRAVEL: 9.8″, DIMENSIONS: 27’ LR X 6’ FB X 6’4” H, ELECTRICS: 220 VOLTS, 3 PH, 60 CYC, TOTAL WEIGHT: 5,291 LBS, ELECTRICAL CABINET WEIGHT: 600 LBS, SENSITIVE MAT WEIGHT: 450 LBS, FEATURES THE MACHINE CAN BE PROGRAMMED BY THE OPERATOR TO PERFORM, IN A SINGLE WORKING CYCLE, DIFFERENT OPERATIONS IN A SEQUENCE ON FIVE SURFACES OF THE WORKPIECE. WORK TABLE IS ARRANGED FOR HOLDING A LINE OF PIECES TO BE MACHINED; THE MACHINE CAN PERFORM THE OPERATIONS ON ALL PIECES IN A SINGLE CYCLE, OPTIMIZING TOOL CHANGE OPERATIONS. BY USING VERTICAL, HORIZONTAL AND ANGULAR UNITS, OR BLADES AND END MILL TOOLS THE MACHINE CAN PERFORM DIFFERENT OPERATIONS SUCH AS:  CORNER OPERATIONS (GROOVING, BORING, INTERPOLATION), END MILLING OPERATIONS (CUTTING EXCLUDED), VERTICAL AND HORIZONTAL OPERATIONS (GROOVING, BORING, INTERPOLATION), EQUIPPED WITH ISAC CNC CONTROL, 6-POSITION TOOL CHANGER, MISCELLANEOUS TOOL HOLDERS, CHUCK WITH TWO HORIZONTAL SPINDLES FOR MILLING TOOLS, UNIST MIST SYSTEM FOR TOOLS AND SPINDLE, S/N: 06696 (2000) [STOCK # JV-20612TK]
  FADAL MODEL VMC6535HT VERTICAL MACHINING CENTER WITH FANUC CONTROL, TABLE SIZE: 74.8” X 26.5”, FLOOR TO TABLE SURFACE: 40.3”, T-SLOTS (NO. X WIDTH X SPAN): 5 X .709″ X 4.92″, MAXIMUM WEIGHT ON TABLE: 4,250 LBS, TRAVELS: LONGITUDINAL (X-AXIS): 65″, CROSS (Y-AXIS): 35″, VERTICAL (Z-AXIS): 34″, SPINDLE NOSE TO TABLE: 5″ – 39″, SPINDLE CENTER TO COLUMN WAYS: 37.4″, MAIN MOTOR – WYE/DELTA VECTOR DRIVE: 15 HP, SPINDLE SPEED: 10 – 10,000 RPM, SPINDLE TAPER: CAT # 40, 24 POSITION AUTOMATIC TOOL CHANGER SIDE MOUNT, DUAL ARM TYPE, DIMENSIONS: 219” LR X 130” FB X 133” H, MACHINE WEIGHT: 29,000 LBS, ELECTRICS: 240 VOLTS, 3 PH, 60 CYC, COOL POWER SYSTEM: SPINDLE, BALLSCREWS, BALL SCREW SIZE: 62.2 MM DIA X/Y/Z, EQUIPPED WITH FANUC 18i-MB5 CONTROL, 24 POSITION DUAL ARM TOOL CHANGER, RIGID TAPPING, AIR/OIL SPINDLE, CHIP CONVEYOR, WASH DOWN, HIGH PRESSURE THROUGH SPINDLE COOLANT, S/N: 012006109226 (2006) [STOCK # JV-21023TK]
  OKUMA CADET-MATE VERTICAL MACHINING CENTER WITH OKUMA OSP700M CNC CONTROL, X-AXIS TRAVEL (TABLE): 40”, Y-AXIS (SADDLE): 20”, Z-AXIS (SPINDLE HEAD): 20”, SPINDLE END TO TABLE SURFACE: 7.8” – 27.8”, SPINDLE CENTER TO COLUMN FRONT SURFACE: 20”, TABLE SIZE: 47.24” X 20.08”, EFFECTIVE SIZE: 40” X 20”, LOAD CAPACITY: 1,500 LBS, SPINDLE TAPER HOLE: NT #40, SPEED RANGE: 40 – 8,000 RPM, MAIN MOTOR: 15/10/7.5 HP, (10 MIN/30 MIN/CONT), 20-POSITION TOOL MAGAZINE CAPACITY – 20 TOOLS, 200 VOLT, EQUIPPED WITH OKUMA OSP700M CNC CONTROLS,
BOX WAYS, HELICAL CUTTING, RIGID TAPPING, S/N 0247 (1997) [STOCK # HB-20259]
  MATSUURA MODEL RA-IIIF VERTICAL MACHINING CENTER WITH PALLET CHANGER & YASNAC I80 CONTROL, X-AXIS TRAVEL: 31.49″, Y-AXIS TRAVEL: 17.32”, Z-AXIS TRAVEL: 19.09″, FROM PALLET SURFACE TO SPINDLE END: 5.9″ – 25″, FROM PALLET CENTER TO COLUMN GUIDEWAY: 9.84″ – 27.16″, FROM SPINDLE CENTER TO COLUMN GUIDEWAY: 18.50″, PALLET WORKING SURFACE: 31.5″ X 16.5″, PALLET LOADING CAPACITY: 660 LBS,  SPINDLE SPEED RANGE: 30 – 8,000 RPM, SPINDLE TAPER: BT-40, SPINDLE MOTOR: 20 HP, 40-POSITION AUTOMATIC TOOL CHANGER, AUTOMATIC PALLET CHANGER, 2 PALLETS, METHOD OF PALLET CHANGE: SHUTTLE TYPE, EQUIPPED WITH YASNAC i80 CONTROL WITH REMOTE MPG, 40 POSITION SIDE MOUNT TOOL CHANGER, PALLET CHANGER (2), SPINDLE OIL CHILLER, CHIP CONVEYOR, BOXED WAYS, GEARED HEAD, S/N: 96061200A (1996) [STOCK # JV-21042GP]
  LEADWELL MODEL MV-610 VERTICAL MACHINING CENTER WITH FANUC O-M CONTROL, TABLE SIZE: 30.3” X 15.7”, WORKING AREA: 35” X 19.7”, MAXIMUM LOAD CAPACITY: 880 LBS, X-AXIS TRAVEL: 24″, Y-AXIS: 16.1″, Z-AXIS: 20″, SPINDLE NOSE TO TABLE: 5.1” – 25.2”, SPINDLE CENTER TO COLUMN: 17.7”, SPINDLE TAPER: # 40, SPINDLE DIAMETER: 2.8”, SPINDLE SPEED RANGE: 80 – 8,000 RPM, MOTOR (30 MINUTE): 10 HP, MOTOR (CONTINUOUS): 7.4 HP, AUTOMATIC TOOL CHANGE SYSTEM TOOL SHANK TYPE: CAT-40, 24-POSITION TOOL MAGAZINE CAPACITY, EQUIPPED WITH FANUC O-M CONTROL, 24 POSITION SIDE MOUNT TOOL CHANGER, COOLANT SYSTEM, S/N: L1SIG0305 (1997) [STOCK # HB-20188]
  LATHES
  MEUSER MODEL M3L GAP BED ENGINE LATHE, SWING OVER BED: 28”, SWING OVER CROSS SLIDE: 20”, WIDTH OF BED: 16-1/2”, CENTER DISTANCE: 120”, SWING IN GAP: 40”, WIDTH OF GAP IN FRONT OF FACEPLATE: 10”, WIDTH OF GAP: 15”, HEADSTOCK SPINDLE NOSE: D1-8, HOLE THROUGH SPINDLE: 2-5/8”, SPINDLE SPEEDS (12): 22 – 1,800 RPM, CARRIAGE CROSS FEED TRAVEL: 15-3/4”, NUMBER OF THREADS: 263, RANGE OF ENGLISH THREADS (86): 1/4 – 152 TPI, RANGE OF METRIC THREADS (60): .05 – 76 MM, DIAMETRICAL PITCH (82): 1 – 176 TPI, MODULE THREADS (35): .25 – 21, QUILL DIAMETER: 3-3/8”, QUILL TRAVEL: 7”, LENGTH OF TAILSTOCK BEARING ON BED: 14”, OFFSET ADJUSTMENT ON EITHER SIDE OF CENTER: MT 5, 5 HP MOTOR,  EQUIPPED WITH 20” 4-JAW CHUCK, 28” 4-JAW CHUCK, STEADY REST, FOLLOW REST, TAPER ATTACHMENT (INCOMPLETE), S/N: M3L-38001 (1967) [STOCK # GP-20509]
  TOS TRENCIN MODEL SN63B/1500 ENGINE LATHE, SWING OVER BED CAPACITY: 25”, SWING OVER CROSS SLIDE: 13-1/2”, SWING IN GAP: 34-1/2”, LENGTH OF GAP FROM SPINDLE NOSE: 15-1/4”, CENTER DISTANCE: 60”, HEADSTOCK SPINDLE SPEEDS (16): 10 – 1,000 RPM, SPINDLE HOLE: 2-3/4”, SPINDLE NOSE: D1-8, SPINDLE CENTER: 5 MT, INCH THREADS: 1 – 80 TPI, METRIC THREADS: .05 – 40 MM, MODULE THREADS: .25 – 20 MM, CROSS SLIDE TRAVEL: 16”, TAILSTOCK SPINDLE TRAVEL: 9-1/2”, TAPER IN TAILSTOCK BARREL: 5 MT, MAIN DRIVE MOTOR: 7.5 HP, EQUIPPED WITH 15” 4-JAW CHUCK, TOOL POST, S/N: 063150760236 (1976) [STOCK # CK-20614]
  CLAUSING/METOSA MODEL C2087SS (SOFT START) GAP BED PRECISION ENGINE LATHE, SWING OVER BED CAPACITY: 20.87″, CENTER HEIGHT: 10.24″, SWING IN GAP: 30.71″, GAP LENGTH (IN FRONT OF FACEPLATE): 8.66″, SWING OVER CARRIAGE: 18.70″, SWING OVER CROSS SLIDE: 12.80″, HEADSTOCK BORE: 3.15″, NOSE: D1 8, TAPER: MT #5, SPEEDS (12): 30 – 1,500 RPM, METRIC THREADS (55): 0.5   15 MM, INCH THREADS (55): 2 – 60”, 0.25 – 7.5, DIAMETRAL PITCH THREADS (55): 4 – 120, LEADSCREW DIA / TPI: 1.38″ / 4, RAM TRAVEL: 7.09″, TAPER: MT #5, 10HP SPINDLE MOTOR EQUIPPED WITH 18” BISON 3-JAW CHUCK, QUICK CHANGE TOOL POST WITH (4) HOLDERS, INCH/METRIC THREADING, STEADY REST, TAPER ATTACHMENT, COOLANT SYSTEM, THREAD DIAL INDICATOR, MICRO CARRIAGE STOP, 4-POSITION CARRIAGE STOP, CHIP PAN, S/N: 39991 (2002) [STOCK # GP-21161]
  STANDARD MODERN MODEL 2080 GEARED HEAD ENGINE LATHE, SWING OVER BED: 22”, SWING OVER BED AND SADDLE WAYS: 20”, SWING OVER CROSS SLIDE: 12”, CENTER DISTANCE: 80″, 15 HP MAIN DRIVE MOTOR, BAR CAPACITY 3″, HEADSTOCK SPINDLE SPEEDS (18): 27 – 1600 RPM, SPINDLE NOSE – CAMLOCK: D1-8”, THROUGH HOLE IN SPINDLE: 3.06”, SPINDLE CENTER: #5 MT, GEAR BOX FEED AND THREAD SELECTIONS: 66, INCH FEED RANGE: .0015 – .105 IPR, INCH THREAD RANGE: 2 TO 127 TPI, METRIC FEED RANGE: .04 TO 2.67 MM/REV, METRIC LEAD RANGE: .2 TO 14 MM, CARRIAGE LENGTH ON BED: 21”, CARRIAGE BRIDGE WIDTH: 10”, CROSS-SLIDE LENGTH: 24”, CROSS-SLIDE TRAVEL: 12”, COMPOUND TRAVEL: 5”, TAILSTOCK QUILL DIAMETER: 2.94”, QUILL TRAVEL: 8”, MORSE TAPER: #5 MT, OFFSET: +.75”, BED WIDTH: 14”, BED DEPTH: 12-1/2”, BED LENGTH: 124”, BASE LENGTH: 134”, BASE WIDTH: 30”, DIMENSIONS, APPROX: 11’ LR X 4’ FB X 4’8” H, ELECTRICS: 220 VOLTS, 3 PH, 60 CYC, EQUIPPED WITH 15″ 3-JAW CHUCK, STEADY REST, S/N: 10221 (1985) [STOCK # HB-19635]
  NEW KINGSTON MODEL HJ 1100 HIGH SPEED PRECISION GAP BED LATHE, SWING OVER BED: 17″, SWING OVER CROSS SLIDE: 10-9/16″, SWING OVER GAP: 24″, LENGTH IN FRONT OF FACE PLATE: 5-7/8″, HEIGHT BETWEEN FLOOR SURFACE AND CENTER LINE: 42-3/8″, DISTANCE BETWEEN CENTERS: 43-1/2″, SPINDLE BORE: 2-1/4″, TAPERS OF SPINDLE HOLE AND CENTER: MT NO 6 x NO 4, SPINDLE NOSE: D1 6, RANGE OF SPINDLE SPEEDS (CHANGES): 12, SPINDLE SPEEDS 35-2000RPM, NUMBER OF FEEDS (CHANGES): 16 , FEED RANGE (LONGITUDINAL): 0.0012   0.034 IPR, FEED RANGE (CROSS): 0.0008   0.023 IPR, DIAMETER AND PITCH OF LEADSCREW: 1-3/8″  4 TPI, MAXIMUM TRAVEL OF TAILSTOCK QUILL: 5-7/8″, MAXIMUM TRAVEL OF CROSS SLIDE: 10-2/5″, MAXIMUM TRAVEL OF COMPOUND: 5-7/8″, TAILSTOCK QUILL O.D. & TAPER: 2-3/8″ / MT #4, LENGTH OF BEDWAY: 82-5/8″, MAIN DRIVE MOTOR: 7-1/2 HP, 7.5 HP, 1 SPEED MOTOR FOR 220/440V, 3 PH, 60 CYCLE WIRING, 12 SPINDLE SPEEDS (35 – 2,000 RPM), 2-1/4″ SPINDLE BORE, SPINDLE NOSE D1 6 CAMLOCK, HEADSTOCK SPINDLE CENTER ADAPTER, MT #6 TO MT #4, GROUND STEEL CENTERS FOR HEADSTOCK AND TAILSTOCK (MT #4), TIMING BELT FOR GEAR CHANGES, THREAD CHASING DIAL, 4 WAY TOOL POST WITH T SLOT, HARDENED AND GROUND BEDWAYS AND CROSS SLIDE, AUTOMATIC LONGITUDINAL MULTIPLE FEED STOP, HALOGEN WORK LIGHT, TOOL BOX WITH NECESSARY WRENCHES AND SPANNERS, INSTRUCTION MANUAL AND PARTS LIST, INCH/MM THREADING, 10″ 3 JAW SCROLL CHUCK, COOLANT SYSTEM WITH PUMP AND PIPING, 4.7″ STEADY REST WITH ROLLER JAWS, FULL LENGTH SPLASH GUARD, 8″ DRIVE PLATE, 14″ FACE PLATE, S/N: CH18533 [STOCK # NW-20942]
  CLAUSING COLCHESTER MODEL 8050 GEARED HEAD STRAIGHT BED ENGINE LATHE, SWING OVER BED: 17-1/4″, SWING OVER SADDLE WINGS: 17-1/4″, SWING OVER CROSS SLIDE: 10-1/2″, BAR CAPACITY THRU SPINDLE: 3″, DISTANCE BETWEEN CENTERS: 40″,HEADSTOCK SPINDLE NOSE: D1-8 CAMLOCK, HOLE THRU SPINDLE: 3 1/16″, SPINDLE CENTER: 5 MT, SPINDLE SPEEDS RANGE (16): 20 – 1,600 RPM, US STANDARD THREADS RANGE (38): 2 – 72 TPI, METRIC THREADS RANGE (40): .4 – 14 MM, CROSS SLIDE TRAVEL: 12-1/4″, COMPOUND REST TRAVEL: 6″, TAILSTOCK CENTER: 5 MT, SPINDLE TRAVEL: 7″, 10HP MOTOR, EQUIPPED WITH 12″ 3-JAW CHUCK, ALORIS QUICK CHANGE TOOL POST WITH HOLDERS, 5” STEADY REST, 5 POSITION LONGITUDINAL STOP, LIVE CENTER, DRILL CHUCK, COOLANT SYSTEM, INCH/METRIC THREADING, S/N: 7/0013/02593 (1968) [STOCK # TK-20640]              
  CLAUSING COLCHESTER MODEL 8030 GEARED HEAD STRAIGHT BED ENGINE LATHE, SWING OVER BED: 15-1/4”, SWING OVER SADDLE WINGS: 15-1/4”, SWING OVER CROSS SLIDE: 9-1/2”, BAR CAPACITY THRU SPINDLE: 2-1/8”, DISTANCE BETWEEN CENTERS: 30”, HEADSTOCK SPINDLE NOSE: 6” – D1 CAMLOCK, HOLE THRU SPINDLE: 2-3/16”, SPINDLE CENTER: 4 MT, NUMBER OF SPINDLE SPEEDS: 16, SPINDLE SPEED RANGE: 25-2,000 RPM, US STANDARD THREADS (45): 2-72 TPI, METRIC THREADS (39): .2- 14 MM, CROSS SLIDE TRAVEL: 9-1/4”, TAILSTOCK SPINDLE DIAMETER: 2-5/16”, CENTER: 4MT, SPINDLE TRAVEL: 6-1/8”, MOTOR AND CONTROLS MAIN MOTOR: 7.5 HP, ALORIS 2-WAY TOOL POST WITH HOLDER, MICRO CARRIAGE STOP, THREAD CHASING DIAL, CHIP PAN, COOLANT, INCH/METRIC THREADING, S/N: 6/0013/02842 [STOCK # HB-20761]                        
  CLAUSING COLCHESTER MODEL 8030 GEARED HEAD STRAIGHT BED ENGINE LATHE, SWING OVER BED: 15-1/4”, SWING OVER SADDLE WINGS: 15-1/4”, SWING OVER CROSS SLIDE: 9-1/2”, BAR CAPACITY THRU SPINDLE: 2-1/8”, DISTANCE BETWEEN CENTERS: 30”, HEADSTOCK SPINDLE NOSE: 6” – D1 CAMLOCK, HOLE THRU SPINDLE: 2-3/16”, SPINDLE CENTER: 4 MT, SPINDLE BEARINGS: GAMET PRECISION, NUMBER OF SPINDLE SPEEDS: 16, SPINDLE SPEED RANGE: 25-2,000 RPM, US STANDARD THREADS (45): 2-72 TPI, METRIC THREADS (39): .2- 14 MM, CARRIAGE LONGITUDINAL FEEDS (45): .0015” – .040”, CROSS FEEDS: .00075” – .020”, CROSS SLIDE TRAVEL: 9-1/4”, TAILSTOCK SPINDLE DIAMETER: 2-5/16”, CENTER: 4MT, SPINDLE TRAVEL: 6-1/8”, 7.5HP MAIN MOTOR, EQUIPPED WITH 10” 4-JAW CHUCK, TAPER ATTACHMENT (NOT COMPLETE), THREAD CHASING DIAL, TOOL POST, JACOBS DRILL CHUCK, INCH/METRIC THREADING, TAILSTOCK, S/N: 6/0013/02838 [STOCK # HB-20762]
  HARDINGE LATHES
  HARDINGE DV-59 SECOND OPERATION LATHE, SPINDLE CAPACITY / 5C ROUND: 1-1/16″, BED LENGTH: 36″, SWING OVER BED: 9″, SPINDLE SPEEDS: 230 TO 3,500 RPM (8 STEPS), EQUIPPED WITH QUICK SLIDE WITH TOOL BLOCKS, CAPSTAN TURRET, TAILSTOCK, X-Y COMPOUND SLIDE, S/N: DV59-3571-3 (1953) [STOCK # HB-17093]
  HARDINGE MODEL DV-59 SECOND OPERATION ENGINE LATHE, SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING, SPINDLE CAPACITY W/ROUND 5C COLLETS: 1-1/16″, VARIABLE SPINDLE SPEEDS: 230 TO 3,500 RPM, BED LENGTH CAPACITY (FROM SPINDLE FACE): 36″, SWING OVER BED: 9″, DISTANCE BETWEEN CENTERS: 17″, TOP SLIDE TRAVEL: 4-1/4″, BOTTOM SLIDE TRAVEL: 5″, EQUIPPED WITH THREADED NOSE SPINDLE, COMPOUND SLIDE REST, LEVER 5C COLLET CLOSER, TAILSTOCK, WORKLIGHT, S/N: DV-59-1820 [STOCK # CK-17588]
  HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 9” SWING OVER BED, SPINDLE SPEEDS: 750, 1800, 3000 RPM, 10″ LENGTH OF BED FROM FACE OF SPINDLE, 0.5 HP SPINDLE MOTOR, 1-1/16″ SPINDLE CAPACITIES WITH ROUND 5C COLLETS, EQUIPPED WITH LEVER TYPE 5C COLLET CLOSER, THREADED SPINDLE, S/N: HSL-5C-5034-T (1983) [STOCK # TK-21138] 
  HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 9″ SWING OVER BED, SPINDLE SPEEDS: 750, 1800, 3000 RPM, LENGTH OF BED FROM FACE OF SPINDLE: 10″, 0.5 HP SPINDLE MOTOR, 1-1/16″ SPINDLE CAPACITIES WITH ROUND 5C COLLETS, EQUIPPED WITH LEVER TYPE 5C COLLET CLOSER, TAPERED SPINDLE, S/N: HSL-5C-5732-T (1985) [STOCK # TK-21139]
  HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, SPINDLE SPEEDS: 750, 1800, 3000 RPM, 9″ SWING OVER BED, 10″ LENGTH OF BED FROM FACE OF SPINDLE, 0.5 HP SPINDLE MOTOR, EQUIPPED WITH LEVER TYPE 5C COLLET CLOSER, STAND, X & Y-AXIS HARDINGE COMPOUND, S/N: HSL-5C-1770-F (1969) [STOCK # DK-19101] 
  HARDINGE MODEL HC CHUCKER, 1-1/16″ SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS, 2.189″ SPINDLE NOSE DIAMETER, 2-3/16″ – 10 RH SPINDLE NOSE THREAD, 9″ MAXIMUM FIXTURE DIAMETER, 13″ MAXIMUM DISTANCE FROM FACE OF TURRET TO SPINDLE, TRAVEL OF CROSS SLIDE: 4-1/2″, 1/4 TO 10 IPM CROSS SLIDE POWER FEED RANGE, SPINDLE SPEEDS: 3 SELECTOR VARIABLE SPEED MACHINES, LOW SPEEDS: 125 TO 1100 RPM, HIGH SPEEDS: 1100 TO 3000 RPM, EQUIPPED WITH ACU-RITE 2-AXIS DRO, 8 POSITION TURRET WITH POWER FEEDS, 5C LEVER OPERATED COLLET CLOSER, COOLANT SYSTEM, 5” 3-JAW CHUCK, 6” 2-JAW CHUCK, MISC COLLETS, MISC TURRET TOOLING, 6 POSITION DRUM STOP, WORK LIGHT, S/N: HC-1477E [STOCK # TK-18875]
  HARDINGE MODEL HC CHUCKER, SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING, 1-1/16″ SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS, 2.189″ SPINDLE NOSE DIAMETER, 2-3/16″ – 10 R.H. SPINDLE NOSE THREAD, 9″ MAXIMUM FIXTURE DIAMETER, 13″ MAXIMUM DISTANCE FROM FACE OF TURRET TO SPINDLE, 4-1/2″ TRAVEL OF CROSS SLIDE, 1/4 TO 10 IPM CROSS SLIDE POWER FEED RANGE, SPINDLE SPEEDS 3 SELECTOR VARIABLE SPEED MACHINES, LOW SPEEDS: 125 TO 1100 RPM, HIGH SPEEDS: 1100 TO 3000 RPM, EQUIPPED WITH ACU-RITE 2-AXIS DRO, 8 POSITION TURRET, LEVER OPERATED COLLET CLOSER, COOLANT SYSTEM, 6” 2-JAW CHUCK, MISC COLLETS, MISC TURRET TOOLING, S/N: HC-29496 (1959) [STOCK # TK-18874]
  HARDINGE MODEL DSM-59R (HOT ROD) SECOND OPERATION TURRET LATHE, HARDINGE BS #21SPINDLE TYPE, 10 SPINDLE SPEEDS: 450 TO 4000 RPM, 29″ BED LENGTH CAPACITY (FROM SPINDLE FACE), 9″ SWING OVER BED, FEATURES FAST START, FAST STOP, FAST-REVERSE PRODUCTION DRIVE, PROVIDING TEN SPEEDS THROUGH CHANGE PULLEYS COMPLETE WITH SINGLE-VOLTAGE, 2 SPEED REVERSING MOTOR, EQUIPPED WITH LEVER STYLE COLLET CLOSER, COOLANT SYSTEM, MISCELLANEOUS HARDINGE BS #21 COLLETS, S/N: DV-59-8051 (1962) [STOCK # NK-19074]
  TERNSTROM & SWANSON (HARDINGE COPY) HSL-59 SUPER PRECISION SPEED LATHE, 9″ SWING OVER BED, SPINDLE SPEEDS: 750, 1800, 3000 RPM, 10″ LENGTH OF BED FROM FACE OF SPINDLE, 0.5 HP SPINDLE MOTOR, SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16″, EQUIPPED WITH LEVER TYPE 5C COLLET CLOSER, TAPERED SPINDLE [STOCK # TK-21142]            
  MILLING MACHINES
  SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” X 54” TABLE WORKING SURFACE, 30” LONGITUDINAL TRAVEL, 16.5” CROSS TRAVEL, 17” VERTICAL TRAVEL, 3 HP VERTICAL SPINDLE, 2 HP HORIZONTAL SPINDLE, 4 HP TABLE LONGITUDINAL FEED, VERTICAL SPINDLE NOSE: 40 NST, SPINDLE SPEEDS: 60 – 4,500 RPM, QUILL TRAVEL: 5”, VERTICAL FEEDS: .04, .08, .16, .0018, .003, .006 IPR, HEAD SWIVEL: 90 DEGREES, OVERARM TRAVEL: 18.5”, OVERARM SWIVEL: 360 DEGREES, HORIZONTAL SPINDLE NOSE: 40 NST,  SPINDLE SPEEDS (12 STEPS): 80,120, 230, 380, 700, 1,350 RPM, SPINDLE CENTERLINE TO TABLE SURFACE: 0 – 17.5”, EQUIPPED WITH VERTICAL HEAD, POWER DRAWBAR, NEWALL C80 2-AXIS DRO, S/N: 79030480 (1979) [STOCK # CKTK-19748]
  CINCINNATI MODEL 520-16 PLAIN TYPE HORIZONTAL MILL WITH VERTICAL MILLING ATTACHMENT, TABLE WORKING SURFACE: 16-1/4” X 87-3/4”, T-SLOTS (3): 13/16”, DISTANCE BETWEEN T-SLOTS: 3-1/4”, RANGE: LONGITUDINAL: 50″, VERTICAL: 16″, CROSS: 20″, CENTERLINE SPINDLE TO TOP OF TABLE: 0 – 20”, SPINDLE NOSE: NO. 50 TAPER, SPEEDS (24): 16 – 1,600 RPM, POWER RAPID TRAVERSE: LONGITUDINAL: 150 IPM, CROSS: 150  IPM, VERTICAL: 75 IPM, EQUIPPED WITH 20 HP MOTOR, ARBOR SUPPORTS, VERTICAL HEAD, ARBORS, 50 TAPER TOOL HOLDERS, S/N: 4A45P5K1 [STOCK # TK-20937]
  RBI MODEL 305VS 2-AXIS CNC VERTICAL BED MILL WITH TRAK A.G.E 2 CONTROL, TABLE SIZE: 9″ X 42″, LONGITUDINAL TRAVEL OF TABLE: 23-3/4″, CROSS TRAVEL OF SADDLE: 12-3/8″, VERTICAL TRAVEL OF HEAD, POWERED: 18-1/2″, HEAD TILT, LEFT AND RIGHT: 90 DEGREES, QUILL TRAVEL: 5″, SPINDLE SPEEDS, INFINITELY VARIABLE: 60 TO 4,500 RPM, TABLE HEIGHT: 36-1/2″, SPINDLE CENTER TO COLUMN WAYS: 16-1/2″, SPINDLE NOSE TO TABLE TOP, MAX.: 17”, SPINDLE NOSE TO TABLE TOP, MIN.: 2-1/2”, 2 HP MOTOR, EQUIPPED WITH TRAK A.G.E. 2 CONTROL, POWER DRAWBAR, DRO ON QUILL, S/N: 78060800, (1989) [STOCK # HB-19963]
  REPUBLIC LAGUN MODEL FU3-LA UNIVERSAL HORIZONTAL KNEE MILL, TABLE: 63″ X 13″, T-SLOTS IN TABLE: 3 X 3/4″, LONGITUDINAL FEED: 46″, CROSS FEED: 13 3/8″, VERTICAL FEED: 18 1/2″, NUMBER OF FEED CHANGES: 18, RAPID TRAVERSE-VERTICAL: 35″, 10 HP MOTORS-HORIZONTAL SPINDLE DRIVE, SPEEDS- NUMBER OF CHANGES: 18,  #50 MT SPINDLE NOSE, RANGE RPM: 28-1400 RPM,  SELF MOTORIZED HEAD – STEP HEAD: 2 HP, SPEEDS: 55-2940 RPM, 3 HP VARIABLE SPEED HEAD, 55-4250 RPM SPEEDS, EQUIPPED WITH VERTICAL HEAD, ONE MILL ARBOR-B TYPE, TWO ARBOR SUPPORTS, ELECTRIC MOTORS & CONTROL, PENDANT CONTROL, COOLANT SYSTEM, HARDENED & GROUND WAYS, UNIVERSAL VERTICAL HEAD, ELECTRIC BRAKE FOR SPINDLE, AUTOMATIC LUBRICATION, S/N: 37992847 (1990) [STOCK # TK-18899]
  JAFO JAROCIN MODEL FWD-32M HORIZONTAL MILL, TABLE WORKING SURFACE: 12.5” X 49.25”, RANGE TABLE TRAVEL: 33.5”, SADDLE TRAVEL: 9.25”, KNEE TRAVEL: 16.5”, DISTANCE BETWEEN SPINDLE AXIS & TABLE: 0 – 15.75”, NUMBER OF FEEDS 21, #40 SPINDLE TAPER, SPEEDS (16): 56 – 1,800 RPM, 7.5 HP MOTORS HORIZONTAL SPINDLE, EQUIPPED WITH 8” KURT ANGLOCK AIR VISE, S/N: 11511 [STOCK # TK-20317]
  CHEVALIER MODEL FM-3VS VERTICAL MILL, TABLE SIZE: 9” X 48”, 750 LBS WORK PIECE WEIGHT, TRAVELS: X-AXIS: 30”, Y-AXIS: 12”, Z-AXIS: 16”, RAM TRAVEL: 12”, R-8 SPINDLE TAPER, SPEEDS (VARIABLE): 60 – 4,500 RPM TRAVEL: 5”, 3 HP MOTOR, HEAD OVERARM SWIVEL: 360 DEGREES, HEAD SWIVEL (R & L): 90 DEGREES, HEAD SWIVEL (F & B): +45 / -38 DEGREES, EQUIPPED WITH ONE-SHOT LUBRICATION SYSTEM, S/N: FM85C582 (1985) [STOCK # TK-21159]
  ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9” X 49” TABLE  WORKING SURFACE, 37” LONGITUDINAL TRAVEL, 12-3/4″ CROSS TRAVEL, 17″ VERTICAL KNEE TRAVEL, 5/8” T-SLOT SIZE, SPINDLE SPEED DRIVE: 70 – 4,200 RPM, R-8 TAPER, 3 HP MOTOR, QUILL DIAMETER: 3-3/8″, QUILL TRAVEL: 4-7/8”, EQUIPPED WITH NEWALL 2-AXIS DRO, SERVO TABLE POWER FEED, ONE SHOT LUBE, S/N: K2V-2290 (2000) [STOCK # TK-21063] 
  BRIDGEPORT SERIES I VERTICAL MILL, 9″ X 42″, 9″ X 42″ TABLE SIZE, 30″ TABLE TRAVEL, SADDLE TRAVEL CROSS FEED: 12″, QUILL TRAVEL DOWN FEED: 5″, KNEE TRAVEL: 16″, RAM TRAVEL: 12″, VARIABLE SPEED RANGE (LOW): 60-500 RPM, VARIABLE SPEED RANGE (HIGH): 500-4,200 RPM, EQUIPPED WITH PATHFINDER 2-AXIS DIGITAL READOUT, X-AXIS POWER FEED, COLLET RACK WITH MISCELLANEOUS COLLETS, S/N: 118608 (1968) [STOCK # TK-21137]
  BRIDGEPORT MODEL J STEP PULLEY VERTICAL MILL ,9″ X 42″ WORKING SURFACE, 30″ LONGITUDINAL TRAVEL, 12″ CROSS TRAVEL, 16″ VERTICAL KNEE TRAVEL, T-SLOTS & SIZE: 3 T-SLOTS, 5/8″, HEAD MOVES R-L: 90 DEGREES, HEAD TILTS F-B: 45 DEGREES, SPINDLE DRIVE/SPEED (8 STEPS): 80 – 2720 RPM, R-8 SPINDLE TAPER, 5″ QUILL TRAVEL, EQUIPPED WITH SERVO POWER TABLE FEED, S/N: 115898 [STOCK # GP-21160]
  ALLIANT MODEL RT2 VERTICAL MILL, 9” X 42” WORKING SURFACE, 30″ LONGITUDINAL TRAVEL, 12-3/4″ CROSS TRAVEL, 17″ VERTICAL KNEE TRAVEL, SPINDLE SPEED DRIVE: 70 – 4,200 RPM, R8 SPINDLE TAPER, MINIMUM SPINDLE CENTER TO BODY: 4-1/2″, MAXIMUM SPINDLE CENTER TO BODY: 19-3/4″, MINIMUM DISTANCE SPINDLE TO TABLE: 3/4”, MAXIMUM DISTANCE SPINDLE TO TABLE: 17-3/8”, POWER QUILL FEED, EQUIPPED WITH ACU-RITE 2-AXIS DRO, TABLE POWER FEED, ONE SHOT LUBE, S/N: 90214165 [STOCK # HB-20102]              
  LAGUN MODEL FTV-1 VERTICAL MILL, TRAVERSE LONGITUDINAL TRAVEL MANUAL: 29.5”, LONGITUDINAL TRAVEL WITH POWER FEED: 26”, CROSS TRAVEL: 16”, MAXIMUM VERTICAL CAPACITY: 18.5”, VERTICAL KNEE TRAVEL: 16”, RAM TRAVEL: 16”, 2 HP MAIN MOTOR, INFINITELY VARIABLE SPEED HEAD: 54-4500 RPM, QUILL POWER FEEDS: .0015,  .003, .006 IPR, R-8 SPINDLE TAPER, 5” QUILL TRAVEL, EQUIPPED WITH CHROME WAYS, SERVO TABLE FEED, ONE-SHOT LUBE, WORK LIGHT, S/N: 19191 [STOCK # HB-19371]
  VICTOR MODEL 380V VARIABLE SPEED VERTICAL MILL, 10″ X 50″ WORKING SURFACE, X-AXIS TRAVELS: 36″, Y-AXIS: 16″, Z-AXIS: 16″, QUILL: 5″, COLLET CAPACITY: 1/4 – 1”, R8 SPINDLE TAPER, 3HP HORSEPOWER, SPINDLE SPEED, VARIABLE SPEED: 60 – 4200 RPM, EQUIPPED WITH X-AXIS POWER FEED, S/N: 3948 [STOCK # HB-19049] 
  SHELDON MODEL 0 HORIZONTAL MILL, HOLE THROUGH SPINDLE: 9/16”, SIZE OF SPINDLE TAPER: NO 9 B & S, SIZE OF TABLE: 5” X 20”, NUMBER OF TABLE T-SLOTS: 1, WIDTH OF T-SLOT: 7/16”, LONGITUDINAL TRAVEL OF TABLE: 12”, CROSS TRAVEL OF TABLE: 5-1/2”, VERTICAL TRAVEL OF TABLE: 9-1/4”, EQUIPPED WITH POWER LONGITUDINAL TABLE FEED, KURT D40 4” VISE, S/N: 3-5144 [STOCK # GP-21117]
  GRINDERS – ALL TYPES
  TARNOW MODEL RUP-28 UNIVERSAL CYLINDRICAL GRINDER WITH INTERNAL GRINDING ATTACHMENT, MAXIMUM SWING OVER TABLE: 12”, MAXIMUM OD GRINDING DIAMETER: 11”, MAXIMUM DISTANCE BETWEEN CENTERS: 20”, MAXIMUM WORKPIECE WEIGHT IN CENTERS: 270 LBS, MAXIMUM WORKPIECE WEIGHT IN CHUCKS: 44 LBS, GRINDING WHEEL DIMENSIONS: 16” X 2” X 5”, MINIMUM WORN GRINDING WHEEL DIAMETER: 10.25”, GRINDING WHEEL SPINDLE SPEEDS: 1,850 – 2,180 RPM, 7.5 HP MAIN DRIVE MOTOR, WHEEL HEAD SWIVEL ANGLE TOWARD FOOTSTOCK/WORK HEAD: 30°/30°, 2” AUTOMATIC RAPID FEED STROKE, INFEED RANGES: COARSE: .012” – .236”, FINE: .003” – .118”, AUTO INFEED RANGE AT TABLE REVERSAL: .001” – .0015”, INTERNAL GRINDING ATTACHMENT MAXIMUM ID DIAMETER: 7-7/8”, MAXIMUM GRINDING LENGTH: 4-3/4”, SPINDLE SPEED RANGES (4): 5,706/8,560/10,000/15,000, 17,120/30,000 RPM, 1.5 HP INTERNAL GRINDING MOTOR, WORK HEAD SWIVEL ANGLE TOWARDS OPERATOR/WHEEL: 30°/90°, MT 4 CENTER TAPER, TABLE TRAVERSE SPEED, INFINITELY VARIABLE: 75 – 4,000 RPM, SPARK OUT TIME, CONTROL RANGE: 0 – 10 SECONDS, HYDRAULIC FOOTSTOCK 1” MAXIMUM SPINDLE RETRACTION, MT 4 CENTER TAPER, MANUAL QUILL TRAVEL: 5/8”, ELECTRICS: 220 VOLT, 60 CYC, 3 PH, EQUIPPED WITH SONY 2-AXIS DRO, INTERNAL GRINDING ATTACHMENT, COOLANT SYSTEM WITH MAGNETIC SEPARATOR, CENTERS, S/N: 1908 (2000) [STOCK # TK-20451]
  TONGIL MODEL TGU27 UNIVERSAL CYLINDRICAL GRINDER, 10.6″ X 20″ TABLE SIZE, 360 DEG. SWIVEL OF WORKHEAD, (120 DEG. GAUGED), SWING OVER TABLE: 10.6″, 20″ GRINDING LENGTH BETWEEN CENTERS, 6″ DIAMETER GROUND WITH NEW WHEEL (MAX),  286 LBS WORKPIECE WEIGHT (MAX), WORKHEAD SPEEDS (6 STEPS): 46, 68, 100, 152, 238, & 360, RPM AT 60 HZ, M.T. #4 WORKHEAD CENTER TAPER, 0.77″ DIAMETER OF SPINDLE HOLE, WORK TABLE LONGITUDINAL TRAVERSE MANUAL (MAX): 25″, HYDRAULIC (MAX): 24.4″, AUTOMATIC LONGITUDINAL TRAVERSE: 2 – 157 IPM, SWIVEL ANGLE, WHEELHEAD SWIVEL OF WHEELHEAD: 30 DEG. EACH DIRECTION, (60 DEG. TOTAL), TAILSTOCK TRAVEL OF TAILSTOCK SPINDLE: 1.18″, TAILSTOCK SPINDLE TAPER: M.T. #4, INTERNAL GRINDING SPINDLE, SPINDLE SPEED: 18,000 RPM, 1 HP MOTOR POWER, ELECTRIC MOTOR POWER 5 HP WHEELHEAD, 0.4 HP WORKHEAD, EQUIPPED WITH INTERNAL GRINDING SPINDLE  (NEEDS TO BE REBUILT), 8″ 3-JAW CHUCK FOR WORKHEAD, 6″ 3-JAW CHUCK FOR WORKHEAD, OPERATION & PARTS MANUALS, COOLANT, SET OF ID SPINDLE ARBORS (8), CENTERS, STEADY REST, S/N: 019022 (1980) [STOCK # JK-12161]
  CHEVALIER MODEL FSG-2A-1224H 2-AXIS HYDRAULIC SURFACE GRINDER, 12” X 24” TABLE SIZE, 24″ GRINDING LENGTH, 12” GRINDING WIDTH, DISTANCE (SPINDLE CENTER TO TABLE SURFACE): 24-3/4″, TABLE LONGITUDINAL TRAVEL, HYDRAULIC: 25-5/8”, MAXIMUM LONGITUDINAL TRAVEL, MANUAL: 27-1/2”, TABLE SPEED: 16 – 82 FPM, CROSS TRANSVERSE TRAVEL, RAPID TRAVEL: 56 IPM, AUTOMATIC TRANSVERSE INCREMENT: .04” – .5”, MAXIMUM AUTOMATIC TRANSVERSE TRAVEL: 14-1/8”, MAXIMUM MANUAL TRANSVERSE TRAVEL: 14-1/2”, HANDWHEEL PER REVOLUTION: .2”, HANDWHEEL PER GRADUATION: .001”, WHEELHEAD VERTICAL INFEED HAND WHEEL PER REVOLUTION: .1”, HANDWHEEL PER GRADUATION: .0005”, MOTORS GRINDING SPINDLE DRIVE (60 HZ): 1,750 RPM, 5 HP SPINDLE MOTOR,  2 HP HYDRAULIC PUMP MOTOR, EQUIPPED WITH ELECTROMAGNETIC CHUCK, SONY 2-AXIS DRO, PARALLEL MOUNTED WHEEL DRESSER, HYDRAULIC & COOLANT SYSTEM TANKS, DUST COLLECTOR, AUTO LUBRICATOR, S/N: P2857001 (1999) [STOCK # TK-21035]
  ACER MODEL AGS 1224 AHD AUTOMATIC SURFACE GRINDER, 11″ W X 23″ L WORKING SURFACE OF TABLE, 12″ W X 24″ L MAXIMUM GRINDING,  24-1/2″ MAXIMUM TABLE TRAVEL, 14″ MAXIMUM CROSSFEED TRAVEL, 23-1/2″ DISTANCE TABLE SURFACE TO SPINDLE CENTER, VARIABLE TABLE SPEED BY OIL CYLINDER: 16 – 80 FPM, AUTOMATIC CROSSFEED CARRIAGE MOVEMENT: 0 – 1″, DOWNFEED HANDWHEEL DIAL, PER GRADUATION: 0.0005″, DOWNFEED HANDWHEEL DIAL, PER REVOLUTION: 0.1″, CROSSFEED HANDWHEEL DIAL, PER GRADUATION: 0.001″, CROSSFEED HANDWHEEL DIAL, PER REVOLUTION: 0.2″,  AUTO DOWNFEED DIAL PER GRADUATION: 0.0001″, AUTO DOWNFEED DIAL PER REVOLUTION: 0.01″, LONGITUDINAL TRAVEL FROM-TO: 6-24″, CROSSFEED TRAVEL FROM-TO: 0-13″, 5 HP SPINDLE MOTOR, GRINDING WHEEL (OD X T X ID): 14″ X 5″ X 1-1/4″, ROTATION SPEED OF SPINDLE: 1750 RPM, EQUIPPED WITH AUTO SURFACE & PLUNGE DOWNFEED, 12″ X 24″ ELECTROMAGNETIC CHUCK & CONTROL, OVERHEAD PARALLEL DRESSER, DUST SUCTION & COOLANT SYSTEM, AUTO LUBE, S/N: 96050433 (1996) [STOCK # TK-21157]
  CHEVALIER MODEL FSG-818AD 3-AXIS HYDRAULIC SURFACE GRINDER, 8″ X 18″ TABLE SIZE, 18″ MAXIMUM GRINDING LENGTH, 8″ MAXIMUM GRINDING WIDTH,  MAXIMUM DISTANCE BETWEEN SPINDLE CENTER TO TABLE SURFACE: 18″, LONGITUDINAL TRAVEL, HYDRAULIC: 20”, MAXIMUM LONGITUDINAL TRAVEL, MANUAL: 22”, TABLE SPEED: 16 – 98 FPM, CROSS TRANSVERSE TRAVEL: RAPID TRAVEL: 10 FPM, AUTOMATIC TRANSVERSE INCREMENT: .02” – .5”, MAXIMUM AUTOMATIC TRANSVERSE TRAVEL: 8-5/8”, MAXIMUM MANUAL TRANSVERSE TRAVEL: 9-1/2”,  WHEELHEAD VERTICAL INFEED: AUTOMATIC INFEED: .00005” – .002”, MICRO-FEED: .00005”, MOTORS: 3,450 RPM GRINDING SPINDLE SPEED, 2 HP SPINDLE MOTOR, 575 VOLT/240 VOLT WITH TRANSFORMER, EQUIPPED WITH 8” X 18”PERMANENT MAGNETIC CHUCK, PARALLEL MOUNTED WHEEL DRESSER, TRANSFORMER, S/N: 03B-0047M (1988) [STOCK # TK-20076]
  COVEL MODEL 10H HYDRAULIC 2-AXIS SURFACE GRINDER, 6” X 18” WORKING SURFACE, 20″ LONGITUDINAL TRAVEL, 7” TRAVERSE TRAVEL, CAPACITY UNDER GRINDING WHEEL: 16-1/2” UNDER 7” WHEEL, CENTERLINE OF SPINDLE TO TOP OF TABLE” 3-1/2” – 20”, OVERALL SIZE OF TABLE: 9-7/8 X 44-1/4”, GRINDING WHEEL: 7” X 1/2” X 1-1/4”, 1 HP, 3,450 RPM MOTOR: TABLE DRIVE (HYDRAULIC): 5 TO 70 FPM (OR HAND), CROSS-FEED (HYDRAULIC, INF VARIABLE): .005 TO .250” (RAPID OR HAND), HYDRAULIC PUMP MOTOR: 1/2 HP, 1,750 RPM, EQUIPPED WITH ACU-RITE D-200 2-AXIS DIGITAL READOUT, 6” X 18” PERMANENT MAGNETIC CHUCK, BIJUR ONE-SHOT LUBE, S/N: 10H-5698 (1968) [STOCK # TK-20500]
  BROWN & SHARPE MICROMASTER MODEL 618 SURFACE GRINDER, WIDTH AND LENGTH OF WORK GROUND: 6″ X 18″, HEIGHT OF WORK GROUND WITH 8″ WHEEL: 15″, 1 HP MOTOR, SPINDLE SPEEDS: 3,450 RPM, LONGITUDINAL TABLE FEEDS: HYDRAULIC: 5 – 100 FPM, MAXIMUM LONGITUDINAL TRAVEL: 22”, EQUIPPED WITH 6″ X 18″ PERMANENT MAGNETIC CHUCK, COOLANT TANK WITH PUMP, S/N: 523-6181-1589 (1963) [STOCK # NK-19764]
  HARIG MODEL SUPER 618 2-AXIS SURFACE GRINDER, LONGITUDINAL TRAVEL: 18 ¾”, CROSSFEED TRAVEL: 6 ¾”, VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″, PLATEN WORKING AREA: 6″ X 18″, SPINDLE SPEED: 3,450 RPM, MOTOR: 220 VOLTS, 3 PH, 60 CYC, 1 HP, EQUIPPED WITH 6″ X 18″ PERMANENT MAGNETIC CHUCK, HYDRAULIC LONGITUDINAL TRAVEL – 0 – 70 FPM, VARIABLE ELECTRIC CROSSFEED, COOLANT SYSTEM, 2-AXIS MICROMETER DOWNFEED, S/N: 717-18 (1979) [STOCK # JK-19482]                   
  HARIG MODEL 618 SURFACE GRINDER, 18-3/4″ LONGITUDINAL TRAVEL, 6-3/4″ CROSSFEED TRAVEL: 0 – 70 FPM, HYDRAULIC LONGITUDINAL TRAVEL, 12″ VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL), 6″ X 18″ PLATEN WORKING AREA, 3,450 RPM SPINDLE SPEED, 1 HP MOTOR, EQUIPPED WITH 6″ X 18″ WALKER CERAMAX PERMANENT MAGNETIC CHUCK, VARIABLE ELECTRIC CROSSFEED, POWER ELEVATION, WORKLIGHT, NO COOLANT PUMP, S/N: 5081-W (1982) [STOCK # DK-17994]
  K O LEE MODEL S714 HANDFEED SURFACE GRINDER, 13-1/2″ X 6″ TABLE WORKING SURFACE, 7/16″ T-SLOT WIDTH, TABLE TRAVEL LONGITUDINAL: 14″, CROSS FEED: 7-1/4″, HAND WHEEL GRADUATION:  VERTICAL: .0001″ (.05 IPR), CROSS FEED: .001″ (1 IPR), GRINDING WHEEL: 8″ X 3/4″ X 1-1/4″, SPINDLE SPEED: 2,850 RPM, 1 HP, 3450 RPM SPINDLE MOTOR, EQUIPPED WITH 1-AXIS ACU-RITE DIGITAL READOUT ON CROSS TRAVEL, 6″ X 12″ WALKER PERMANENT FINE POLE MAGNETIC CHUCK, WORK LIGHT, S/N: 21099-PG (APPROX. 1974) [STOCK # TK-13132]
  BROWN & SHARPE MODEL MICROMASTER 612 HAND FEED SURFACE GRINDER, 6” W X 12” L GRINDING CAPACITY, HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12”, DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN, SPINDLE ANTI-FRICTION BEARING UNIT WITH ORIFLEX DRIVE THRU 6 “O” RINGS, 1 HP DRIVE, SPEED (NO LOAD) 2,860 RPM, SPINDLE SLIDE UPRIGHT TRAVERSE MOVEMENT BY HANDWHEEL:7”, TABLE WORKING SURFACE: 6” X 12”, EQUIPPED WITH 6” X 12” WALKER PERMANENT MAGNETIC CHUCK, FINE FEEDS VERTICAL & CROSS, AUTO LUBE, LEVER OPERATED TRAVERSE, S/N: 523-612-3476 (1982) [STOCK # DK-14372]
  BROWN & SHARPE MODEL MICROMASTER 612 HAND FEED SURFACE GRINDER, 6” W X 12” L GRINDING CAPACITY, 12” HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE,  DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN, 1 HP DRIVE, SPEED (NO LOAD): 2,860 RPM, SPINDLE SLIDE UPRIGHT TRAVERSE MOVEMENT BY HANDWHEEL: 7”, TABLE WORKING SURFACE: 6” X 12”, NUMBER OF T-SLOTS: 1, WIDTH OF T-SLOTS: 9/16”, WHEEL SPINDLE VERTICAL SLIDE ADJUSTMENT: 12-1/2”, EQUIPPED WITH 6” X 12” WALKER PERMANENT MAGNETIC CHUCK, CROSS & DOWNFEEDS HAVE FINE FEEDS (.0001”), HEIDENHAIN DRO ON DOWNFEED, AUTO LUBE, LEVER OPERATED TRAVERSE, S/N: 523-612-3131 (1980) [STOCK # DK-14324] 
  KENT MODEL KGS-200 HAND FEED SURFACE GRINDER, TABLE WORKING SURFACE: 16″ X 6-1/4″, LONGITUDINAL TABLE TRAVEL: 17″, CROSSFEED TABLE TRAVEL: 8″, MAXIMUM DISTANCE CENTER OF SPINDLE TO TABLE: 18″, TABLE LOAD (INCLUDING MAGNETIC CHUCK): 220 LBS, GRINDING WHEEL DIMENSION (O.D. X T X I.D.): 7″ X 1/2″ X 1-1/4″, SPINDLE SPEED: 3480 RPM, VERTICAL MOVEMENT MAXIMUM TRAVEL: 15-1/2″, MOTOR SPINDLE: 1.5 HP X 2 P, EQUIPPED WITH 6″ X 12″ WALKER PERMANENT MAGNETIC CHUCK, DUST COLLECTOR/COOLANT UNIT, ONE SHOT LUBE, WHEEL FLANGE, S/N: 810338-2 (1981) [STOCK # DK-12880]
  CINCINNATI #2 TOOL & CUTTER GRINDER, 6″ X 44″ TABLE WORKING SURFACE, LONGITUDINAL MOVEMENT OF TABLE: 16″, CROSS MOVEMENT OF TABLE: 10″, CROSS RANGE GAINED BY WHEEL HEAD ECCENTRICITY: 3.5″, CROSS RANGE GAINED BY SWIVEL TABLE: 3.5″, TOTAL EXTENDED CROSS RANGE: 17″, TABLE SWIVEL: 180 DEGREES, TABLE GRADUATIONS IN CENTER, IN DEGREES: 90, VERTICAL MOVEMENT OF GRINDING WHEEL SPINDLE: 10.5″, SWIVEL MOVEMENT OF GRINDING WHEEL SPINDLE: 360 DEGREES, MAXIMUM DISTANCE CENTERLINE SPINDLE TO TABLE TOP: 13.625″, EQUIPPED WITH TAILSTOCK, FRONT/REAR CONTROL, S/N: 1D2T1U-287 [STOCK # TK-20688]
  CINCINNATI #2 TOOL & CUTTER GRINDER, 6″ X 44” TABLE WORKING SURFACE, LONGITUDINAL MOVEMENT OF TABLE: 16″, CROSS MOVEMENT OF TABLE: 10″, CROSS RANGE GAINED BY WHEEL HEAD ECCENTRICITY: 3.5″, CROSS RANGE GAINED BY SWIVEL TABLE: 3.5″, TOTAL EXTENDED CROSS RANGE: 17″, TABLE SWIVEL: 180 DEGREES, TABLE GRADUATIONS IN CENTER, IN DEGREES: 90, VERTICAL MOVEMENT OF GRINDING WHEEL SPINDLE: 10.5″, SWIVEL MOVEMENT OF GRINDING WHEEL SPINDLE: 360 DEGREES, MAXIMUM DISTANCE CENTERLINE SPINDLE TO TABLE TOP: 13.625″, EQUIPPED WITH MOTORIZED WORK HEAD WITH 50 TAPER, TAILSTOCK, FRONT/REAR CONTROL, WORK LIGHT, S/N: 1D2T1Y-562 [STOCK # TK-20687]
  CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 10-1/2″ SWING OVER TABLE, 33″ LENGTH, BETWEEN TAILSTOCKS, 28″ LENGTH, BETWEEN TAILSTOCK & WORKHEAD, 10″ FACE MILLS ON WORKHEAD (MAX DIAMETER), TAPER HOLE IN WORKHEAD SPINDLE: 12 B & S, TABLE WORKING SURFACE: 5-1/4” X 37”, LONGITUDINAL MOVEMENT: 16”, LONGITUDINAL MOVEMENT OF TABLE: 24″, CROSS MOVEMENT OF TABLE: 10″, TOTAL EXTENDED CROSS RANGE: 17″, TABLE SWIVELS: 180°, SWIVEL TABLE ADJUSTMENTS: TANGE-BAR TAPER SETTING DEVICE: 5″, FINE ADJUSTMENT TAPER SETTING DEVICE: 2″, TABLE GRADUATION IN CENTER: 90°, VERTICAL MOVEMENT OF GRINDING WHEEL: 10-1/2″, EQUIPPED WITH TAILSTOCKS, ONE SHOT LUBE, WORKLIGHT, COOLANT, S/N: 10216T-180-8-R-76 (1976) [STOCK # GP-21183]
  DIAMOND GROUND PRODUCTS MODEL DGP-3 BENCH MOUNTED TUNGSTEN GRINDER, BENCH MOUNTED TUNGSTEN GRINDER DESIGNED FOR ORBITAL USERS. 6″ BLADE CUT-OFF, 5 AMPS, 110 VOLTS ELECTRICS, EQUIPPED WITH PRECISION CUT-OFF ASSEMBLY, MICROMETER INDEXER, CUTTING WHEEL WITH A SECONDARY SAFETY COVER FOR THE CUT-OFF ASSEMBLY, WORKLIGHT, S/N: 9618 [STOCK # TK-18878] 
  HAGER DIAMOND WHEEL CARBIDE GRINDER, 6″ OD X 1-1/8″ BORE X 3/4″–1″ WIDTH DIAMOND GRINDING WHEELS, TWO GRINDING FACES PER WHEEL: 1/16″ X 1/4″, EQUIPPED WITH (2) USED GRINDING WHEELS, COOLANT, WORKLIGHT, [STOCK # JV-13633TK]
  BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, DRILL SIZES: 1/8” TO 1-1/2”, CUP WHEEL: 6” X 1-1/4” X 1-1/8”, GRINDING WHEEL: 6” X 7/8”  X 1-1/8”, DRILL POINT ANGLE: 59° (ADJUSTABLE FROM 40° TO 70°), CLEARANCE (VARIABLE): 5° TO 16°, DRILL LENGTH: 15”, EQUIPPED WITH STAND, ER COLLETS, GRINDING WHEELS, WHEEL DRESSER, S/N: 13833 [STOCK # GP-21186]
  HAMMOND MODEL OK-12 DOUBLE END PEDESTAL GRINDER, SIZE OF WHEEL: 12” X 2” X 1-1/4”, 2 HP MOTOR, SPINDLE SPEED: 1,750 RPM, EQUIPPED WITH ILLUMINATED SHIELDS, WATER TROUGH, WHEEL GUARDS, S/N: 2002 [STOCK # GP-21187]
  HYPREZ MODEL M3.0 MICROFINISHER, 5-1/2” OSCILLATING WHEELS (2), 13” X 5-1/2” TABLE, EQUIPPED WITH MITERING GAUGE, S/N: 229 [STOCK # DK-19246]
  HYPREZ MODEL M3.0 MICROFINISHER, 5-1/2” OSCILLATING WHEELS (2), 13” X 5-1/2” TABLE, EQUIPPED WITH MITERING GAUGE, S/N: 267 [STOCK # DK-19247]
  FABRICATING MACHINERY
  HTC MODEL 200-12H HYDRAULIC PRESS BRAKE, MAXIMUM FORMING TONNAGE: 200 TONS, MAXIMUM PUNCHING TONNAGE: 132 TONS, DIE OPENING RECOMMENDED: 5-1/2”, DIE OPENING RECOMMENDED: 2”, DISTANCE BETWEEN FRAMES: 10’5”, OVERALL LENGTH OF BED AND RAM: 12’, 20 HP MOTOR, RAM STROKE LENGTH: 5”, OPEN HEIGHT: 11-1/2”, SHUT HEIGHT: 6-1/2”, BED WIDTH: 4”, BED HEIGHT: 36-1/2”, EQUIPPED WITH (2) 2’ FRONT SUPPORT ARMS, 3-1/2” X 12’ DIE, 1-3/4” X 12’ DIE WITH 4” RISER, 3-3/4” X 12’ DIE, 1-1/4” X 12’ PUNCH, 2” X 10’ PUNCH, S/N: 679.G1713 (1979) [STOCK # GP-21181]
  PREMIER MODEL 10120-R HYDRAULIC PRESS BRAKE, CAPACITY: 120 TONS, OVERALL LENGTH OF BED AND RAM: 120”, DISTANCE BETWEEN HOUSINGS: 100”, 20 HP MOTOR, BENDING CAPACITY (MILD STEEL): 10’ X 3/16”, STROKE LENGTH: 8”, OPEN HEIGHT: 15”, SHUT HEIGHT: 7”, EQUIPPED WITH HURCO AUTOBEND #7 CNC BACKGAUGE, TONNAGE CONTROL, REMOTE FOOT PEDAL, S/N: 211 (1999) [STOCK # GP-20825]
  ALLSTEEL MODEL 95T HYDRAULIC PRESS BRAKE, WITH AUTOMEC CNC300 1-AXIS CONTROL, CAPACITY: 95 TONS, BED LENGTH: 96”, DISTANCE BETWEEN UPRIGHTS: 78”, THROAT: 8”, BED HEIGHT: 32”, VARIABLE RAM STROKE: 0 – 6”, OPEN HEIGHT: 15″, APPROACH SPEED: 190 IPM, RETURN SPEED: 190 IPM, VARIABLE PRESSING SPEED: 10- 29 IPM, 15 HP MAIN MOTOR, EQUIPPED WITH AUTOMEC CNC300 1-AXIS CONTROL (BACKGAUGE), S/N: 95289 (2004) [STOCK # TK-20928]
  AMADA MODEL RG-50 UPACTING HYDRAULIC PRESS BRAKE, WITH NC9-EXII 3-AXIS CNC CONTROL, CAPACITY: 55 TON, MAXIMUM BENDING LENGTH: 82”,DISTANCE BETWEEN HOUSINGS: 59.84”, STROKE: 3.9″, NUMBER OF CYLINDERS: 3, MAXIMUM PRESSURE: 2,627 PSI, OPEN HEIGHT: 14.58”, CLOSED HEIGHT: 10.67”, THROAT DEPTH: 15.76″, 5 HP MOTOR, EQUIPPED WITH NC9-EXII 3-AXIS PROGRAMMABLE GAUGING SYSTEM, UPACTING DESIGN, HOLDER CLAMPS, S/N: 506937 (1989) [STOCK # TK-21182]
  NEW TENNSMITH MODEL HB97-16 HEAVY DUTY STRAIGHT BENDING BRAKE, 16 GA CAPACITY, MILD STEEL, BENDING LENGTH: 97″, MAXIMUM LIFT OF BEAM: 1-7/8″, FRONT TO REAR BEAM ADJUSTMENT: 1/2″, MINIMUM REVERSE BEND: 1/4″, MINIMUM FLANGE IN CAPACITY MATERIAL: 1″, S/N: 12219 [STOCK # NW-20997]
  HTC MODEL 500-10A HYDRAULIC POWER SQUARING SHEAR, MAXIMUM CAPACITY: 1/2”, CUTTING WIDTH: 124”, WIDTH OVERALL: 148”, SHIP HEIGHT: 98”, OVERALL DEPTH: 98”, BLADE SIZE: 1” X 4”, HIGH CAPACITY RAKE/ROOT: 5/8”, STANDARD RAKE ANGLE/ROOT: 1/2”, HOLD DOWN CYLINDERS: 11, 40 HP MOTOR, EQUIPPED WITH 36” FRONT OPERATED POWER BACKGAUGE, 5’ SQUARING ARM, ONE SHOT LUBE, ADJUSTABLE RAKE ANGLE, ADJUSTABLE BLADE CLEARANCE, EXTRA PAIR OF 12’ KNIFE BLADES, S/N: 979.T1715 [STOCK # GP-21180]
  RAS MODEL 74.25 CNC FOLDING MACHINE WITH MULTIBEND 9000 CNC CONTROL, MAXIMUM SHEET THICKNESS: 8 GAUGE, SMALLEST INNER BEND RADIUS: 1.25 X SHEET THICKNESS, MINIMUM INSIDE FLANGE HEIGHT: 6 X SHEET THICKNESS, MAXIMUM LENGTH: 100″, MAXIMUM BACKGAUGE DEPTH: 100″, MINIMUM BACKGAUGE DEPTH: .4″ / 10 MM, MACHINE DEPTH: 88″, MACHINE WIDTH: 153.5″, MACHINE HEIGHT: 100″, WORKING HEIGHT: 35.4″, MACHINE WEIGHT: 11,568 LBS, CNC FOLDING BEAM ADJUSTMENT: UP TO 3.15″, UPPER BEAM DRIVE POWER: 10.3 HP, FOLDING BEAM DRIVE POWER: 10.3 HP, EQUIPPED WITH MULTIBEND 9000 CNC CONTROL,  INCLUDES INTEGRATED BACKGAUGE AND SHEET SUPPORT SYSTEM, S/N: 106/30 (1997) [STOCK # TK-19808]
  SAWS – ALL TYPES
  KBC MODEL BS-12A HORIZONTAL BANDSAW, DIAMETER CAPACITY AT 90 DEGREES: 12”, DIAMETER CAPACITY AT 45 DEGREES: 9”, LENGTH: 24” X 3/8”, BLADE SIZE: 150” X 1”, 3 HP MOTOR, NUMBER OF SPEEDS: 6, SPEED RANGE: 45, 75, 90, 120, 150, 240 FPM, BLADE WHEEL DIAMETER: 18”, VISE WIDTH: 9-1/2”, FLOOR TO VISE WAY: 31”, EQUIPPED WITH COOLANT, ROLLER TYPE MATERIAL FEED, [STOCK # HB-20228]
  SPARTAN PHOENIX MODEL PA10 AUTOMATIC HORIZONTAL BANDSAW, CAPACITY: RECTANGULAR: 8″ X 12″, ROUND: 10″, BLADE SIZE: LENGTH: 11′ 6″, WIDTH/GAUGE: 1″ X .035″, BLADE SPEED: INFINITELY VARIABLE: 70 -278 SFPM, MOTORS, ELECTRIC BLADE DRIVE: 3 HP, EQUIPPED WITH OPERATOR CONTROL PANEL, SPLIT FRONT VISE JAWS, BLADE TENSIONING, VARIABLE SPEED BLADE, COOLANT, S/N: DPA-100108 (1993) [STOCK # TK-21070] 
  KYSOR JOHNSON MODEL V-36 VERTICAL BANDSAW, THROAT SIZE: 36″, MAX. WORK HEIGHT: 12″, BLADE WIDTH: 1/16″ – 1″, BLADE LENGTH: 133″ – 140″ (2 WHEELS), 181″ – 185″ (3 WHEELS), INSERT BLADE GUIDE CAPACITY: 1″, BLADE SPEED RANGE, INF. VARIABLE: 50 TO 300 FPM (LOW), 1,000 TO 6000 FPM (HIGH), BLADE SPEED CHANGE: MANUAL, BLADE TENSION: MANUAL, WHEELS: 16-3/4″ DIA., 4″ ADJ. (UPPER), POST OPERATION: MANUAL, TABLE SIZES: 23″ X 23″ (MAIN), 16″ X 23″ (EXTENSION), TABLE TILT: 15 DEGREE RIGHT/LEFT, 3 HP BLADE DRIVE MOTOR, ELECTRICS: 220 VOLTS, 3 PH, 60 CYC, EQUIPPED WITH BLADE WELDER, S/N: 130020 [STOCK # TK-13217] 
  DO-ALL MODEL V-36 VERTICAL BANDSAW, THROAT DEPTH: 36″, WORK HEIGHT: 13″, BLADE SPEED: 50 – 1500 FPM, BLADE WIDTH: 1/2”, SAW BLADE LENGTH: 166”, TABLE SIZE: 30” X 30”, AUXILIARY TABLE: 17” X 20, TABLE TILT: 45° RIGHT, 10° LEFT, 1 HP MOTOR, EQUIPPED WITH BLADE WELDER, JOB SELECTOR, S/N: 36-3949, [STOCK TK-21040]
  DO-ALL MODEL 2612-2H VERTICAL BANDSAW, THROAT: 26″, WORK HEIGHT UNDER GUIDE: 12″, BLADE WIDTH CAPACITY: 1/8″ – 1″,  BLADE LENGTH: 177″, WELDER CAPACITY: 1/8 – 1”, VARIABLE BAND SPEED RANGE: 25 – 6000 SFM, VARIABLE POWER FEED RANGE: 0 – 350 LBS, MAIN TABLE: 26-1/2″ X 33-1/2″, UPPER WHEEL ADJUSTMENT: 3”, TABLE TILT ADJUSTMENT RANGE: 10 DEGREES LEFT, 45 DEGREES RIGHT, EQUIPPED WITH HYDRAULIC TABLE, BLADE WELDER, BAND TENSION INDICATOR, S/N: 206-67244 (1967) [STOCK # DK-18942]
  DO-ALL MODEL 2612-H VERTICAL BANDSAW, THROAT: 26″, WORK HEIGHT UNDER GUIDE: 12″, T-SLOTTED, TILTING TABLE: 24″ X 30-1/2″, BLADE SPEEDS: 25 – 6000 SFM (3 RANGES), BLADE WIDTH CAPACITY: 1/16″ – 1″, BLADE LENGTH: 177″, EQUIPPED WITH BLADE WELDER HYDRAULIC TABLE FEED WITH FOOT PEDAL, THREE SPEED TRANSMISSION, BAND TENSION INDICATOR, S/N: 284-69129 (1969) [STOCK # HB-18732] 
  DO-ALL MODEL 1612-3 CONTOURMATIC  VERTICAL BANDSAW, THROAT: 16”, WORK HEIGHT UNDER GUIDE: 12″, BLADE WIDTH CAPACITY: 1/16″ – 1″, BLADE LENGTH: 125″, WELDER CAPACITY: 1/16” – 1”, TABLE SIZE: 24″ X 30″, TABLE STROKE: 12”, WEIGHT CAPACITY ON TABLE: 1,000 LBS, TABLE TILT ADJUSTMENT RANGE: 10 DEGREES LEFT, 45 DEGREES RIGHT, VARIABLE BAND SPEED RANGE: 35 – 6000 FPM, HYDRAULIC RESERVOIR: 4 GALLONS, EQUIPPED WITH JOB SELECTOR, HYDRAULIC TABLE, BLADE WELDER, BAND TENSION INDICATOR, S/N: 150-60102 [STOCK # TK-21158]
  DO-ALL MODEL 1612-0 VERTICAL BANDSAW, THROAT: 16″, HEIGHT UNDER GUIDE: 12″, VARIABLE SPEED: 50 – 5,200 SFPM, TILTING TABLE: 24″ X 24″, ELECTRICS: 460 VOLTS, 3 PH, 60 CYC, S/N: 277-741478 (1974) [STOCK # TK-21220]
  CLAUSING KALAMAZOO MODEL FS-350A FULLY AUTOMATIC FERROUS CUTTING SAW, BLADE SPEEDS: 30/60 RPM, BLADE ARBOR DIAMETER: 1.2598”, FLANGE DIAMETER: 3.375”, MAXIMUM BLADE SIZE: 13.75”, MAXIMUM VISE OPENING: 6.25”, WORK HEIGHT: 37.5”, CAPACITIES AT 90°: ROUND TUBING: 4.25”, ROUND SOLID: 2”, RECTANGULAR TUBING: 3.25” X 5.5”, RECTANGULAR SOLIDS: 2” X 2”, SQUARE SOLIDS: 2”, CAPACITIES AT 45°: ROUND TUBING: 4.25”, ROUND SOLID: 2”, RECTANGULAR TUBING: 3” X 3.25”, RECTANGULAR SOLIDS: 2” X 2”, SQUARE SOLIDS: 2”, FEATURES AUTOMATIC VISE OPERATION DURING THE CUTTING CYCLE, SELF CENTERING, FLOOD SYSTEM COOLANT, CAST IRON HEAD, HEAD SUPPORT, VISE SUPPORT, VISE JAWS, S/N: 0939 [STOCK # HB-20497]
  SCOTCHMAN BEWO MODEL CPO-350HT/PK COLD SAW, TUBING, 90 DEGREES: ROUND: 4-7/8″, SQUARE: 4-3/8″ X 4-3/8″, RECTANGLE: 5-1/2″ X 4″, TUBING, 45 DEGREES, SOLID, 90 DEGREES, SOLID, 45 DEGREES, SPEED (HT): 44/88 RPM, MOTOR RATE LOW RPM: 1 HP, MOTOR RATE HIGH RPM: 2 HP, FEATURES PNEUMATIC VISE, MITER CAPABILITIES 180 DEGREES LEFT AND RIGHT, MITER LOCKING DEVISE STOPS AT 45 DEGREES LEFT, STRAIGHT 90 DEGREES AND 45 DEGREES RIGHT, DOUBLE REDUCTION GEAR BOX. BOTH GEARS ARE HARDENED AND GROUND, S/N: 1617-04-91 (1991) [STOCK # GP-21086]               
  NEW SCOTCHMAN-BEWO MODEL CPO 350 LT CIRCULAR COLD SAW, CUTTING SPEEDS: SPEED 1 / SPEED 2: 22 / 44 RPM, 3 HP MOTOR RATE, MAXIMUM BLADE DIAMETER: 14″, ARBOR BORE: 1-9/16″, CAPACITIES WITH MAXIMUM DIAMETER BLADES: TUBING 90°, TUBING 45°, SOLID 90°, SOLID 45°, S/N: B113961218 [STOCK # NW-20993]
  DAKE EUROMATIC 370PP FERROUS TYPE AUTOMATIC COLD SAW, MAXIMUM BLADE SIZE: 14-1/2”, MAXIMUM VISE OPENING: 8-3/4”, MAXIMUM FEED VISE OPENING: 6-1/2”, MOTOR: 3.5/4.5 HP, BLADE SPEEDS: 25/50 RPM, ROUND SOLID AT 90°: 4″, ROUND SOLID AT 45°: 3-5/8”, ROUND TUBING AT 90°: 5-1/16”, ROUND TUBING AT 45°: 5”, SQUARE TUBING AT 90°: 4”, SQUARE TUBING AT 45°: 3-7/8”, RECTANGULAR TUBING AT 90°: 4” X 7”, RECTANGULAR TUBING AT 45°: 4” X 6”, S/N: 4097 (1997) [STOCK # TK-19551] 
  SAVAGE CAMPBELL MODEL 2B DRY ABRASIVE CUT-OFF SAW, WHEEL CAPACITY: 20″, WHEEL DRIVE MOTOR: 10 HP, 3,450 RPM, OSCILLATION MOTOR: 1/3 HP, GEAR MOTOR, 45 RPM, SPINDLE SPEED: 2,150 RPM, SPINDLE BEARINGS: PRELUBRICATED AND SEALED BALL BEARINGS, CUTTING WHEEL DIMENSIONS: 20” DIAMETER, 1/8” THICK, 1” ARBOR HOLE, WHEEL FLANGE: 5” DIAMETER, EQUIPPED WITH OSCILLATION, S/N: 2B-82-3013 (1982) [STOCK # TK-19871] 
  EVERETT ABRASIVE CUT-OFF SAW, WHEEL CAPACITY: 10″ WHEEL, ARBOR SHAFT: 5/8″ ARBOR, DRIVE: DUAL RAW EDGE SURE GRIP “V” BELT WITH STEEL SHEAVES, CAPACITY: 1-1/2″ SOLID, 2″ PIPE, 3 HP SPECIAL HI-TORQUE MOTOR, TOTALLY ENCLOSED FAN-COOLED, STOP: ADJUSTABLE DOWN STOP LIMITS DEPTH OF CHOP STROKE, EQUIPPED WITH VARIABLE INVERTER DRIVE, COOLANT STYLE STAND – NO PUMP, MANUAL DOWN FEED, [STOCK # DK-16909]
  IRONWORKER
  GEKA HYDRACROP 110S HYDRAULIC IRONWORKER, PUNCH POWER: 120 TON, DEPTH OF THROAT: 12”, WORKING HEIGHT: 45-1/8”, SHEAR FOR FLATS: FLATS: 24” X 5/8”, LENGTH OF BLADES: 16” X 3/4”, SQUARE BAR: 24”, WORKING HEIGHT: 38”, CUTTING & L-IRON LEG AT 45 DEGREES: 4”, SHEAR FOR SECTION IRON ANGLE STATION: 200 TON, L AT RIGHT ANGLE (NON DEFORMATION SYSTEM): 6” X 6” X 1/2”, L AT 45 DEGREES: 3” X 3” X 5/16”, BAR CROPPER: ROUND BAR: 2″, SQUARE BAR: 2″, NOTCHER SHEET METAL: 1/2”, L IRON: 4”, DEPTH: 3-1/2”, WIDTH: 2”, 12.5 HP MOTOR, FEATURES MACHINE DRIVEN BY 2 CYLINDERS, 5 WORKING STATIONS, RAPID TOOL CHANGE, SUPPORT TABLE WITH ANGULAR POSITIONING STOPS FOR CUTTING FLATS, 2 SIMULTANEOUS WORKING STATIONS, EQUIPPED WITH HIGH SPEED HYDRAULIC SYSTEM, BAR LENGTH STOP, MACHINE LIGHT, (10) PUNCHES & DIES, S/N: 20760 (2006) [STOCK # TK-21151] 
  BELTSANDER
  JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, MAXIMUM WORKING WIDTH: 50”, MAXIMUM WORKING THICKNESS: 6.2”, BELT MEASUREMENT: 86” X 51”, MINIMUM WORKING LENGTH: 11-3/4”, 30 HP MAIN MOTOR, FEEDING SPEED: 6.5 – 30 FPM, EQUIPPED WITH DIGITAL READOUT FOR MOTORIZED HEIGHT ADJUSTMENT, SINGLE HEAD, PNEUMATIC ABRASIVE BELT TENSIONING, VARIABLE CONVEYOR BELT SPEED FREQUENCY CONTROLLED, MEDIA FILTER COOLANT SYSTEM WITH PAPER FILTER, S/N: D8144 (2005) [STOCK # TK-21053]
  PUNCH PRESS, GAP FRAME
  KOMATSU MODEL OBS-60-3 GAP FRAME PUNCH PRESS, CAPACITY: 66 TON, STROKE: 4.7, SHUT HEIGHT TO BOLSTER: 11.81”, SLIDE ADJUSTMENT (MOTORIZED): 2.76”, SPEED: 70 SPM, SLIDE (RAM) AREA: 19.69” LR X 15.75” F, BOLSTER PLATE: 47.24” LR X 21.65” FB X 3.15” H, FLOOR TO BED: 33”, THROAT DEPTH: 11.6”, OPENING THROUGH BACK: 24”, DISTANCE BED TO FLOOR: 30.3”, APPROXIMATE WEIGHT: 10,200 LBS, FEATURES PNEUMATIC WET CLUTCH & BRAKE WITH SELECTOR CONTROLS, ARRANGED FOR KNOCKOUT L-R, EQUIPPED WITH HYDRAULIC OVERLOAD PROTECTION, (2) AIR COUNTERBALANCE CYLINDERS TO SLIDE, STROKE POSITION INDICATOR, S/N: 13159 (1989) [STOCK # JV-20346TK]
  HYDRAULIC PRESSES
  DAKE MODEL 5-025 ELEC-DRAULIC H-FRAME PRESS, CAPACITY: 25 TONS, 2 HP HORSEPOWER, RPM: 1,800 RPM, RAM SPEED (ADVANCE): 80 IPM, RAM SPEED (PRESS): 14 IPM, WIDTH BETWEEN UPRIGHTS: 32-3/4″, WIDTH BETWEEN TABLE CHANNELS: 7 1/4″, MINIMUM RAM TO TABLE: 5″, MAXIMUM RAM TO TABLE: 40″, RAM TRAVEL: 10″, HORIZONTAL WORKHEAD TRAVEL: 14-3/8″, [STOCK # DK-18138]
  MULTIPRESS MODEL FH20-20H HYDRAULIC PRESS, RATED CAPACITY: 20 TONS, STROKE (ADJUSTABLE): 12″, THROAT: 10″, DAYLIGHT: 21″, BED SIZE: 26” X 17”, 20 HP MOTOR, RESERVOIR CAPACITY: 55 GAL, EQUIPPED WITH DUAL PALM BUTTONS, S/N: 31222 (1985) [STOCK # TK-20149]
  MULTIPRESS MODEL WR87M C-FRAME FLOOR TYPE HYDRAULIC PRESS, TONNAGE: 8 TON, STROKE: 12″, DAYLIGHT: 16”, BED SIZE: 18″ X 11″, THROAT: 7-1/2”, 7.5 HP MOTOR, EQUIPPED WITH STAND, HANDWHEEL ADJUSTABLE STROKE CONTROL, S/N: 26969 [STOCK # TK-19711]
  DENISON C-FRAME HYDRAULIC PRESS, CAPACITY: 8 TON, STROKE: 12″, DAYLIGHT: 18″, THROAT: 8″, 10″ X 16″ BED AREA, EQUIPPED WITH FLOOR MODEL, DUAL HAND LEVER CONTROL [STOCK # GP-20809]
  DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, CAPACITY: 1 TON, STROKE: 3″, DAYLIGHT: 8-1/4″, THROAT: 4-1/2″, 3/4 HP ELECTRIC MOTOR, BASE PLATE AREA: 9″ X 10″, EQUIPPED WITH PALM BUTTONS, POSITIVE CYLINDER STOP ASSEMBLY, S/N: 6070 (1988) [STOCK # DK-17761]
  DIE FLIPPER
  MTC MODEL E-4436 DIE HANDLER/FLIPPER, LOAD CAPACITY: 2,500 LBS, WORKING AREA UPPER PLATEN: 12″ X 38″, CENTER PLATEN: 26″ X 39-1/2″, PLATEN CLEARANCE: 0 DEGREES MAXIMUM: 27″, 0 DEGREES MINIMUM: 9″, 180 DEGREES MAXIMUM: 21-1/4″, 180 DEGREES MINIMUM: 3-1/4″, VERTICAL TRAVEL UPPER PLATEN: 18″, ELEVATING RATIO HAND CRANK/HIGH SPEED: 1/8 IPR, HAND CRANK/LOW SPEED: 1/16 IPR, CENTER PLATEN TO FLOOR: 32″, EQUIPPED WITH POWER ELEVATION, S/N: 27535 [STOCK # CK-14580]
  RADIAL DRILLS
  JOHANSSON HEAVY DUTY RADIAL DRILL, 3 & 1/2 HP MOTOR, COLUMN DIAMETER: 12”, SPINDLE TO FACE OF COLUMN AT TABLE & BASE: 7” – 36”, SPINDLE RADIUS: 18” – 46”, HORIZONTAL TRAVEL OF HEAD ON RAM: 29”, TABLE TO SPINDLE: 4” – 32”, TABLE TRAVEL: 16”, TABLE WORKING SURFACE: 26” X 40”, BASE WORKING SURFACE: 28” X 32”, BASE HEIGHT: 7”, SPINDLE TRAVERSE IN HEAD: 10”, MAXIMUM HOLE DEPTH: 22”, SPINDLE POWER FEED (INF VARIABLE): 0 -12 IPM, SPINDLE MORSE TAPER: 5 MT, SPINDLE QUILL DIAMETER: 3-1/2”, SPINDLE SPEEDS (16): 60-900, EQUIPPED WITH JACOBS DRILL CHUCK, S/N: 31981 [STOCK # TK-20747]
  GIDDINGS & LEWIS BICKFORD MODEL CHIPMASTER 951 RADIAL DRILL, DISTANCE SPINDLE TO COLUMN FACE: 48″, COLUMN DIAMETER: 9″, SPINDLE SPEEDS (9): 60-1200 RPM, SPINDLE TAPER: 4 MT, EQUIPPED WITH 23” X 18” X 16” BOX TABLE, TAPPING, S/N: 951-00218-64 [STOCK # NK-19602]
  WMW/MEUSELWITZ MODEL BR40x1250/1 RADIAL DRILL, COLUMN DIAMETER: 12”, DISTANCE FROM CENTER OF DRILL TO SPINDLE COLUMN: 11.8 – 49”, DISTANCE FROM SPINDLE TO BASE PLATE: 14.75” – 54”, SWING RADIUS OF DRILL SPINDLE: 17.7” – 55”, SWING RANGE OF ARM: 360 DEGREE, DRILL SPINDLE MAXIMUM STROKE: 14”, 30SPEED 20-1200 RPM, 3/5 HP MAIN MOTOR, EQUIPPED WITH 27” X 27” X 19” BOX TABLE, S/N: 10/8514/055 [STOCK # HB-18984] 
  DRILLS
  WILTON MODEL 2380 DIRECT DRIVE ROUND COLUMN DRILL PRESS WITH ROCKFORD MULTI SPINDLE DRILL HEAD & MECHANICAL CLUTCH, CAPACITY: 33”, SPINDLE TO COLUMN: 16-1/2”, 7.5 HP MOTOR, STEEL DRILLING CAPACITY: 2-3/4”, CAST IRON DRILLING CAPACITY: 2-1/8”, QUILL DIAMETER: 3.78″, SPINDLE SPEEDS (12): 42 – 1,486 RPM, SPINDLE TRAVEL: 11”, SPINDLE TO BASE: 51″, SPINDLE TO TABLE: 2-3/4” – 30-1/2”, TABLE WORKING SURFACE: 23.5” X 23.5”, T-SLOT SIZE: 5/8”, TILTING ANGLE (LEFT/RIGHT): 45°, MAXIMUM WORK CAPACITY: 400 LBS, SPINDLE TAPER: 5MT, EQUIPPED WITH ROCKFORD MODEL 960 6-SPINDLE DRILL HEAD, MECHANICAL POWER FEED CLUTCH ENGAGEMENT, HEAVY DUTY QUILL AND SPINDLE, AUTOMATIC FEEDS, S/N: 614 [STOCK # GP-21003]
  LEBLOND FOSDICK MODEL 5B SLIDING HEAD TYPE DRILL PRESS, MOTOR (HIGH/LOW): 3 HP/1.5 HP, SPINDLE SPEEDS (12): 27 – 900 RPM, THROAT: 24”, SPINDLE TRAVERSE: 6”, SPINDLE MORSE TAPER: 4MT, TABLE WORKING SURFACE: 24” X 24”, EQUIPPED WITH DRILL CHUCK, HEAVY DUTY T-SLOTTED BASE, WORK LIGHT, S/N: R3246 [STOCK # TK-20746]
  CLAUSING MODEL 2234-501 FLOOR DRILL WITH AIR HYDRAULIC FEED, CAPACITY, HAND FEED: 1-1/4”, DRILL TO CENTER OF CIRCLE: 20″, SPINDLE TAPER: #3 MT, SPINDLE TRAVEL: 6-1/2″, PRODUCTION TABLE: 45” X 29”, NUMBER OF SPEEDS: 5, SPEED RANGE: 300 – 2,000 RPM, 1HP MOTOR, AIR-HYDRAULIC FEED MAXIMUM STROKE: 5-1/2”, FEED (INF VARIABLE): 1/2 TO 60 IPM, MAXIMUM RAPID APPROACH: 280 IPM, EQUIPPED WITH STEP PULLEY COUNTERSHAFT DRIVE, AIR HYDRAULIC FEED, S/N: 110909 [STOCK # TK-21089] 
  CLAUSING MODEL 2286 2-SPINDLE VARIABLE SPEED DRILL PRESS WITH PRODUCTION TABLE, DRILL TO CENTER OF CIRCLE: 20″ DIA, CAPACITY (HAND FEED): 1-1/4″ DIA, SPINDLE NOSE:  # 3 MORSE TAPER, 1.74″ OD, SPINDLE TRAVEL: 6-1/2″, COLUMN (GROUND STEEL): 4″ DIA., 1/2″ THICK WALL, QUILL (GROUND STEEL): 2-1/2″, 2 HP MOTOR, INFINITELY VARIABLE SPEED: 150 – 2000 RPM, EQUIPPED WITH  (2) DRILL CHUCKS, 120” x 24” PRODUCTION TYPE TABLE, S/N: 523730 & 523733 [STOCK # TK-21114] 
  WALKER TURNER MODEL 20 SINGLE SPINDLE, STEP PULLEY BENCH DRILL, CAPACITY: 20″, NUMBER OF SPEEDS: 15, SPEED RANGE: 260 – 5200 RPM, SPINDLE TRAVEL: 6-1/2″, SPINDLE TAPER: #3 MT, 1/2HP, S/N: 51EC4A [STOCK # CK-14399] 
  CINCINNATI ROYAL 18 3-SPINDLE STEP PULLEY DRILL PRESS, DRILL HEADS: 3, DRILL TO CENTER OF CIRCLE: 18”, SPINDLE TAPER: #3 MT, QUILL TRAVEL: 6”, SPEEDS (5 STEPS): 390 – 3,100 RPM, COOLANT TABLE: 24” X 52”, S/N: 2LCBA580, 2LCBA5F79, 2LCBA5F77 [STOCK # HB-20507]
  ROCKWELL MODEL 15-665 2-SPINDLE DRILL, DRILL TO CENTER OF CIRCLE: 15”, STEP PULLEY: 5 STEPS, COLUMN: 3” WIDE X 38” HIGH, 24” X 28” COOLANT TABLE, S/N: 1396556, 1396557 [STOCK # CK-19397] 
  CLAUSING MODEL 1639 3-SPINDLE DRILL WITH AIR HYD FEEDS, 7-1/2″ THROAT DEPTH, DRILLING CAPACITY CAST IRON: 5/8″, MILD STEEL: 1/2″, SPINDLE TAPER: #2 MT, SPINDLE TRAVEL: 4-3/4″, SPINDLE SPEEDS (5) W/STEP PULLEY DRIVE: 260 – 1800 RPM, EQUIPPED WITH 2217 AIR HYDRAULIC FEED ON ALL THREE HEADS, S/N: 126817, 126818, 126819 (1990) [STOCK # DK-17883]
  HONES
  SUNNEN MODEL MBB1800D/E HONE, I.D. RANGE: .060″ – 6.5″, LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA., STROKING RATES: 80, 110, 160, 220, 310 SPM, SPINDLE SPEEDS: 200 – 2500 RPM, 1 HP SPINDLE MOTOR, 1/2 HP STROKER MOTOR, EQUIPPED WITH AUTOMATIC SHUT OFF, KNN 300 POWER STROKE ATTACHMENT, S/N: 73142 (1973) [STOCK # TK-11823]
  SUNNEN MODEL MBB1800J HONE, I.D. RANGE: .060″ – 6.5″, LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA, STROKING RATES: 80, 110, 160, 220, 310 SPM, SPINDLE SPEEDS: 200 – 2500 RPM, 1 HP SPINDLE MOTOR, STROKER MOTOR: 1/2 HP, EQUIPPED WITH POWER STROKE, S/N: 73508 (1975) [STOCK # TK-14065]
  SUNNEN MODEL MBB1800E HONE, I.D. RANGE: .060″ – 6.5″, LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA, STROKING RATES: 80, 110, 160, 220, 310 SPM, SPINDLE SPEEDS: 200 – 2500 RPM, SPINDLE MOTOR: 1 HP, STROKER MOTOR: 1/2 HP, EQUIPPED WITH POWER STROKE, S/N: 80227 (1975) [STOCK # TK-13136]
  ROTARY TABLE
  LOGANSPORT MATSUMOTO MODEL DAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE, TABLE DIAMETER: 6.9″, TABLE HEIGHT IN HORIZONTAL: 10.4″, OVERALL HEIGHT AT 90° TILTED: 13″, CENTER HEIGHT AT 90° TILTED: 8.3″, THRU HOLE DIAMETER: 0.7″, WIDTH OF GUIDE BLOCK: 0.7″, PERMISSIBLE LOAD: 66 LBS, ROTARY AXIS: 0.001 DEG., TILTING AXIS: 0.001 DEG., WEIGHT: 638 LBS, S/N: 101376 (2000) [STOCK # HB-17912]
  COMPARATOR
  NIKON MODEL V-14 VERTICAL BEAM OPTICAL COMPARATOR, SCREEN DIAMETER: 14”, MEASURING STAGE: 6” X 11-1/8”, TRAVEL: 4” X 2-3/8”, EQUIPPED WITH 3 POSITION LENS TURRET WITH 10X/20X/50X/100X LENSES, SURFACE & PROFILE ILLUMINATION, MICROMETER DIALS, S/N: 36727 [STOCK # HB-20394] 
  MISCELLANEOUS MACHINERY
  US BAIRD 1 SPRING GENERATOR, MAXIMUM WIRE DIAMETER: .034″, MINIMUM WIRE DIAMETER: .008″, WIRE FEED LENGTH, RANGE: 6.45″ – 25.78″ – WITH OPTIONAL CHANGE GEARS, PRODUCTION SPEEDS, PIECES PER HOUR: 600 TO 5000, 1/2 HP MOTOR HORSEPOWER, EQUIPPED WITH UNCOILER (STAND) WITH BODINE TYPE FPM ADJUSTABLE SPEED / TORQUE CONTROL, VARIABLE SPEED BELT OVEN, VARIABLE SPEED DRIVE, LOADS OF TOOLING, S/N: 5605-46412 (1973) [STOCK # DK-16662]
  INGERSOLL-RAND MODEL T30/ 10T3NL (15 HP) TWO-STAGE RECIPROCATING DUPLEX AIR COMPRESSOR, 15 HP PUMP MOTORS (2), ELECTRICS: 460 VOLTS, 3 PH, 60 CYC, EQUIPPED WITH HORIZONTAL TANK, RATED 200 PSI, MAGNETIC STARTER, INGERSOLL RAND DXR-140 REFRIGERATED AIR DRYER, S/N: 30T-680436 & 30T-680435 [STOCK # GP-21162]
  HANKISON MODEL 80400 WATER COOLED DRYER, MINIMUM-MAXIMUM OPERATING CONDITIONS: MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR), MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR), OPTIONAL: 300 PSIG (21 BAR), MAX INLET AIR TEMP (COMPRESSED AIR AT INLET TO DRYER): 120° F (49° C), MIN-MAX AMBIENT TEMPERATURE WATER-COOLED: 35° F (1.7°C)- 130°F (54°C), NOMINAL PRESSURE DROP AT RATED FLOW: 4.8 PSID, REFRIGERATION SYSTEM SERVICE DATA: CONDENSING UNIT MFG: TECUMSEH, S/N: 0328-105-9409-4 (1994) [STOCK # TK-16291] 
  AIRFLOW SYSTEMS MODEL DT-3000V2 DOWNDRAFT TABLE, TABLE SIZE: 66.25” X 42”, CONSTRUCTION: 10GA WELDED STEEL, DOWNDRAFT VELOCITY: 155 FPM, WEIGHT: 850 LBS, 5 HP MOTOR, FEATURES DIRECT-DRIVE FRP BLOWER, NON-ELECTROSTATIC OPERATION, VIBRA PULSE FILTER CLEANING SYSTEM, EQUIPPED WITH PRESSURE GAUGE KIT, REGULATOR, S/N: 1009414 (2002) [STOCK # CK-20219] 
  A & E MODEL NKLF-46 SPOT WELDER WITH ROCKER ARM, 45 KVA, 34” THROAT LENGTH, ELECTRICS: 220 VOLTS, 3 PH, 60 CYC, S/N: FC300001 [STOCK # JV-20493HB]
  DO-ALL MODEL BRM-2266 DEBURRING MACHINE, CAPACITY, DIAMETER: 2” – 6”, CAPACITY (LENGTH): 2” – 6”, BELT SPEED: 2 TO 20 FPM, PARTS PER HOUR: 200 TO 600, 1/42 HP DRIVE MOTOR, 1/2 HP BELT MOTOR,  1/2 HP UPPER BELT MOTOR, S/N: 542-99105 (1999) [STOCK # GP-21119] 
  NIAGARA 4′ HORIZONTAL SHEET METAL GROOVER, GROOVES: 1″ X 4′, 1/2″ X 4′, 3/8″ X 4′, 1/4″ X 4′, S/N: 79S [STOCK # CK-17612]
  AERCOLOGY (DONALDSON) FD-2000 OVERHEAD AIR FILTRATION SYSTEM, 2 HP MOTOR, ELECTRICS: 208 VOLTS, 3PH, 60 CYC, 6.5 AMPS, S/N: 696201 [STOCK # JV-20022TK]                 
  PLYMOVENT FUME/DUST EXTRACTION ARM, 6″ ARM DIAMETER, [STOCK # JV-20023TK] 
  FAMCO MODEL E ARBOR PRESS, DIAMETER OF WORK: 8″, CAPACITY OVER TABLE: 5 1/4″, CAPACITY OVER PLATE: PLATEN, DEPTH OF THROAT: 4″, MAXIMUM STROKE: 5″, [STOCK # GP 9532]

sale held in conjunction with

40 Daniel Street, Farmingdale, NY 11735
Tel. 631.454.1766
info@kosterindustries.com